Depending on where you’re taking your rig helps determines what tires you’ll need.

First up, and probably most common, is the standard highway tread-style tire. It has more of a straight groove to help disperse the water.

Up next is the trailer-style tire. This is used on trailers only, like the name implies, and isn’t designed to be a drive tire or steer tire. It’s made for a high-load capacity and the tread design is pretty simple.

All-terrain style tires are good for the weekend warrior drivers. They can go through the sand, the dirt, the rocks and clean out pretty easily. Another plus is that they’re reasonably priced. They’re found on most trucks and SUVS.

Then there is the actual mud and sand style tire. It has really deep grooves spaced far apart to help send the mud and sand away from the tire as it spins. It’s a directional style tire so it’s only made to spin in one direction. Meaning if you mount it on backward, you won’t get the optimal performance.

Last but definitely not least is the rock-crawling tire. It has really deep treads that come around the side so when you’re in a sticky situation you can get yourself out. They also allow you to air down and make your tread pattern wider.

Repairing any of these tires without taking them off the rim is always good to know and it’s pretty simple. First, you need to remove whatever punctured the tire. Use the reaming tool to make the hole large enough to accept the plug. Then install the rubber plug into the eyelet on the tool and force the plug into the tire. Once the plug is set, quickly remove the tool and you’re good to go.

Websites:

https://www.PowerNationTV.com
https://www.PowerBlockTV.com

Facebook Pages:

PowerNation – https://www.facebook.com/PowerNationTV
PowerBlock – https://www.facebook.com/PowerBlockTV
PowerNation Daily – https://www.facebook.com/PowerNationDaily
Detroit Muscle – https://www.facebook.com/DetroitMuscleTV
Engine Power – https://www.facebook.com/EnginePowerTV
Truck Tech – https://www.facebook.com/TruckTechTV
Xtreme Off Road – https://www.facebook.com/XtremeOffRoadTV

Twitter:

PowerNation – https://www.twitter.com/PowerNationTV
PowerBlock – https://www.twitter.com/PowerBlockTV

Instagram:

PowerNation – @PowerNationTV
PowerBlock – @PowerBlockTV

For more on PowerNation, check out PN+ at http://bit.ly/2oTCIyJ

source

By carmodpros

ANGELHOUSE | 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (CARMODPROS,COM)

2 thoughts on “Uses For Different Tire Applications”
  1. This type of plug is a TEMPORARY fix ONLY! He forgot to trim the excess off the plug. Don't want it getting snagged on something like a crack, hole, or rough terrain and pulling it out. In addition, a larger hole can be temporarily plugged with more than one, but no more than three. A proper plug with a patch base inserted from the inside of the tire and sealed with rubber glue is a permanent fix, as long as the hole isn't too big. In addition, NEVER plug a hole on any part of the tire that is not part of the tread. Splits, gouges, and large chunks in the tire are non repairable and the tire will have to be replaced, especially if it is on the sidewall or the lip of the tire.

  2. PLEASE ONLY use that repair method if it is VERY temporary (no more than a day or two). Your TIRE will eventually separate if not properly fixed with a patch and a plug and the correct glues.

Comments are closed.