**Sponsored video** with great information.
SUNFIRE sent me one of their SUNFIRE 150 heaters to try out in my shop. I’ve been using a ‘torpedo’ heater for years, it works, but it’s quite loud. That doesn’t help when I’m shooting videos. The SUNFIRE 150 is quieter, and puts out more heat than the torpedo. I suspect it will run for much longer too since it has a larger fuel tank.
Be sure to check out this link for more info: https://www.sunfireheater.com/eric-the-car-guy/
#ETCGVideo #sponsored
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog
Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1?sub_confirmation=1
Thanks for watching!
**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Instagram: http://instagram.com/ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.
An oil incinerator would be handy to have as well…
Yeah they did the uncrating thing at the factory I used to work at and put a dent into a something that cost probably about $200k.
Record the noise from the heater and use that sound to cancel out the noise in post production
That thing will be crazy expensive to run. 19 gallons every other day? No thanks. Waste oil heater would be cheaper.
HELP! I need to know do you have videos on how to fix the gauges. None of my gauges work 😢
I have one of these and love it. It won't last as long as a torpedo style heater though due to the extreme temperature cycling and they don't do well with cycling on and off. The torpedo is well suited for long term thermostat driven heating, the sunfire is well suited for those times when you're actually there and want heat while working.
Is it possible to replace crankshaft thrust bearing in my 03 3.8 caravan in the van? Thanks in advance.
What??? At 2300 should have come with caster wheels IMO
Clicked on the video to see the sunfire cattle brander! 😀
Here’s to next year’s video in which this heater gets replaced with one that’s actually quiet, per Eric’s desire!
I don't like non exhausted flame heat. I'd be putting in electric myself, just to be sure I didn't die from CO poisoning or having migraines all the time.. but I don't have a shop so there's that…..
You really should store diesel in a yellow can. RED: Gasoline (Flammable), BLUE: Kerosene (Flammable), YELLOW: Diesel (Flammable), GREEN: Oils (Combustible)
Yeah ok,BUT its noisy!
Shop has an oil burner to heat it, and about 6000 gallons of non reclaimable jet fuel to run it
I put a Renzor external intake/exhaust natural gas unit in my garage 15 years ago… Boy oh boy does one get spoiled with a fully-heated home garage!
Why not just heat the shop with natural gas?
Eric the barbarian🤣🤣🤣
Do you have natural gas service? If so that has some nice quiet options like radiant units on the ceiling. Burning wood in a shop is questionable (gas fumes), but some do it.
Sees…Sunfire Heater Video
Me thinking Oooo Pontiac Sunfire Heater Replacement
Clicks on Video
Oh…..
What about hydrocarbons, I've a gas or what yous would call propane. Everytime I use it I've a banging headache the next day.
Did you use your temperature gun on it?
Adding a ceiling fan, set on clockwise for winter use, made a big difference in my shop blowing the warm air down.
That looks much better and quiter than the Mr Heater forced air unit I just got for my shop. https://youtu.be/8DxoGLfb3NY
Put some baffles in front of it to reduce the noise…
Wow still loud.
I’d like to see you hook up a thermostat to it and then do a “day in the shop†video with it running, then give your viewers the choice of whether it’s too loud for videos or if it’s a acceptable noise level that’s not going to interfere with video quality
I bet inside the control box is something like a house oil burner furnace head.
Link doesn't work…..looks like a nice heater though.
Greetings from Hamilton, Ohio (yes, I'm nearby). It's great to see a superb product proudly displaying the Made In The USA for all to see.
Needs a turbo
Might be a dumb question, but is there any risk of carbon monoxide poisoning with this thing?
Wow…that's a monster, and Made in the USA….NICE!
Can it run on gasoline or crankcase drainings? What about wood chips?
Pros & Cons; I'm concerned with carbon monoxide and any stink. Any info would greatly help I'm getting ready to buy one. Just don't want to spend money if there may be a better route.
Nice heater! IMO I think you'd be fine to leave it running while making videos, especially if it were at the other end of the shop from where you're filming. I could still hear you just fine even with the torpedo heater running, but at least you wouldn't have to shout over this one. People can live with a little background noise. Your comfort matters! 🙂 If you set up a thermostat where you usually work to keep a comfortable temperature with the heater at the other end of the shop, maybe you could time your video takes to coincide with the heater turning off with the thermostat.
😶😶😶red can what red can it was yellow 😂🙈🙊🙉
Eric:â€ÂÂWe can actually have a conversationâ€ÂÂ
Me:â€ÂÂOh not badâ€ÂÂ
*AFTERBURN!!*
i dont trust these heaters and the dangerous gases that come from burning. crack those garage doors a little
i would be worried about too much carbon monoxide or co2 even with those unvented heaters i had monitor kerosene heater for years you just set it on floor by an outside wall drill a small around 2 inch hole through wall and it draws in outside air and exhausts fumes through middle of double pipe you can hook it up to any size kerosene tank you want and it is thermostat controlled totally automatic gently blows warm air out across floor you can barely even hear it run
If you set up a mic recording the sound of the heater, you may be able to remove the signal from the audio post production.
Haven't tried this yet, however why not get a bumch of IR heat lamps and wire them up to additional light sockets in the ceiling? I did that in our bathroom (NYS), and works pretty nice in the winter.
Just put a couple of switches to zone your work area, and turn on/off as needed. Electricity is gotta be a lot cheaper than fuel.
5 months later: any update? how's it been?