Replacing Rotors with Tapered Roller Bearings – EricTheCarGuy

1. Thank you for sharing your knowledge.

2. put a wad of grease in the palm of your hand and press rotate the bearing to pack it. don't waste your time using your finger

3. Did you hear he’s happy🤣🤣😎
   Now I’m 😃

4. do ball bearing need preset?

5. I went through taking my old rotor out and cleaned out the bearings and packed them. After reassembling the rotor and calipers. The rotor wobbles now. I dont understand what I done wrong. Is this normal, I don't remember the old rotor wobbling before I removed it

6. Thanks bro ,,/ 💀 ,,/ !!!!!!

7. great video thanks Eric

8. hi me again , is it necessery to replace the wheel bearing races or could you simply clean them up ? thanks

9. hi , whats the best solvent for cleaning greasey auto parts besides gasoline ? thanks

10. Thankyou !

11. Thnx for ur efforts

12. 2021 before I replace the bearings on my 91 C1500. Mine will have a 383 in it one day like "dad's truck." I bought it new and one day, hopefully later rather than sooner, it will be my son's truck.

13. So do you need to change the bearing races when changing out one of those rotors?

14. Bro,Ten years later &still the best vid on YouTube

15. Need help. I have a 98 Dodge 1500 2wd and the passenger front spindle nut came off. I saved the wheel from flying off while driving. I think I tighten the spindle nut too tight? The spindle nut has me lost. What am I doing wrong?

16. Simply the best car guy on youtube.

17. Do you have to change the inner racer sleeves in new rotors to march the bearings your putting in ,

18. T

19. Thanks old og eric the car guy, now i can do my bearings on my caprice! 😀

20. Great video. I will sand and lube those dry parts thx. Only video that gives a close up of that back bearing seal and which way the damn thing goes in. Maybe could of used a hardware kit.

21. Wow …..
    10 years and you still been the same … congratulations..!!!! Love your videos .!!

22. Glad u pointed out that castle nut is not supposed to be super tight i didnt know that

23. Bout to do this exact job to my 81 cutlass identical everything.

24. THANKS ERIC JUST GOT A 1990 TAHOE AND YES ONE OF THE FRONT IS ATE UP ONLY MORE PASSANGER SIDE ONLY..I PLAN TO REUSE THE SEAL I LET YA KNOW HOW IT GOES ,I HAVE GOOD DAYS AND BAD.. HAVEA NICE HOLIDAY SEASON.. J D

25. Another good thing about the way you release the piston on the caliper: You get that bleeder screw moving. That will prevent it from seizing in there. Usually they are small screws and when, after 5 years of sitting idle, you want to loosen them: Bingo! They strip or break in there. And you are well on your way to buying a new caliper. So, yeah…loosen the bleeder screw.

26. thank you! I am doing a 70 Impala brake job on a 67 Impala.

27. Great tips eric! Thanks, from Belgium Europe🇧🇪🍺🤜 , have exactly these on my mercedes 123 from 1983; very helpfull, thx mate!

28. You had the inner bearings out, so just replace them don’t reuse them.

29. Clamping the brake hose? Are you not concerned about doing damage to the inside of the hose? Bad idea! Don't clamp the hose.

30. Thank you Eric. I love these old videos.
    Your videos have helped , and inspired me over the years. It has been pivotal in changing the course of my life for the better!

31. I love those bearings. You can take them off, clean and grease them, and put them back.

32. Hey Eric, thanks for the video, a couple little tricks that you showed saved the day.

Comments are closed.