The guys drop their high mileage ’93 Senior Silverado street truck with a front and rear suspension lowering kit and finish off the stance with fresh wheels and tires.

PARTS USED IN THIS EPISODE:

Accel: Spark Plug Wires, Extreme 9000 Ceramic, Spiral Core, 8mm, Black, 90 Degree Boots, Universal, V8, Set
More Info: https://pntv.us/pn_pt_278_62d80954711ec

KMC Wheels: Wheel, XD 798 Addict, Aluminum, Black, 20 in. x 9 in., 5 x 5.00 in. Bolt Circle, 5.710 in. Backspace, Each
More Info: https://pntv.us/pn_pt_275_62d80938ef01a

McGaughy’s Suspension Parts: Suspension Lowering Kit, Spindles, Flip Kit, 4 in. Front, 6 in. Rear, Chevy, GMC, Kit, HD Brakes, 1 1/4″ Thick Rotors
More Info: https://pntv.us/pn_pt_284_62d80949292fb

Summit Racing: Paramount Restyling , Bumper, Xtreme Stinger, Rock, Front, Steel, Black Powdercoated, Front, Jeep, Each
More Info: https://pntv.us/pn_pt_279_62d809f754ecd

Summit Racing: WESTERN CHASSIS, Shock, DS2, TwinTube, Front, Chevy, Dodge, GMC, Each
More Info: https://pntv.us/pn_pt_272_62d816cecf68e

Summit Racing: WESTERN CHASSIS, Shock, DS2, TwinTube, Rear, Chevy, GMC, Each
More Info: https://pntv.us/pn_pt_273_62d809ff0bcdc

Falken Tires: P295/40R20, Falken Azenis FK453CC

Kimberly-Clark Professional: Scott Pro Shop Towels – Blue, Solvent Resistant, 200 Count, Pegboard Dispenser Feature

The Industrial Depot: Fasteners, Hardware, and Shop Supplies

WD-40: Aerosol, 12 oz., lubricant, water dispersant, penetrant, protectant

source

By carmodpros

ANGELHOUSE | 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (CARMODPROS,COM)

45 thoughts on “Lowering a Chevy Silverado to a Street Truck Stance – Truck Tech S1, E6”
  1. Help me help me. Someone lol. I did a half c notch like this and now my bed is higher in the rear. All four corners are touch but the 4 inside bolts are not :about a 1/2 inch out. The bed bolted down but you can see it’s higher in the back. The truck looks broke in half. Someone help me

  2. I liked the wheels that were on it more than the new ones, Ya'll need to do a show how to redo a set of factory chrome/custom wheels that has lost their shine, Imagine how good those wheels would look if they were cleaned sandblasted and repainted silver or blacked out. I love these "were going to show you how to build a vehicle on a budget" then you throw a set of $5000 wheels on it…. The Overwhelming majority of us viewers aren't going to do that, Were going to clean-up and redo what we got or were going to jump on Facebook Marketplace or Craigslist and find some used wheels and redo them for $30 instead of spending $5000 on new wheels. Ya'll also need to learn what a wire brush, rubbing alcohol and can of black spray paint is… Ya'll keep bolting up new and shiny to old and rusty… the front suspension was already taken apart, the bed was already off the frame and the rear end and drive shaft were already out of the truck, wire brush it hit it with some rubbing alcohol and then rattle can it, I'm not saying do a frame off but atleast clean and repaint what you can get too. Ya'll do some cool vehicles and give us alot of good tips and how too's but you stop short on alot of it too.

  3. Hold up hold up hold up you guys never mentioned if we should apply heat to the yolk cause if we tap on the yolk without previously applying heat that shits gonna go everywhere even those Scott pro shop towels are gonna have a problem cleaning all of it

  4. He just said exactly what I been thinking the last couple weeks. It will be a classic. Get them now while they’re still affordable. I always wanted a 67 short bed but the price now……. OMG.

  5. Has anyone noticed that chevy owners are usually the ones that lower their truck. Almost all ram and Ford owners don't. It takes a man to step up in your truck. Pansies lower them.

  6. It was really great of them to grease that rotor surface before putting the new pads and caliper on…. And for heavens sake replace the damn ball joints

Comments are closed.