Do It Yourself: 2006 BMW E90 325i Fully Synthetic Oil Change!
MATERIALS/TOOLS NEEDED:
-Strap wrench
-17mm socket wrench
-Screw driver
-OEM oil filter kit (with crush washer and o-rings)
-7 Quarts of fully synthetic oil
-Oil pan
-Gloves
-Rags
INSTRUCTIONS:
1. Jack car up safely on jack stands. Do NOT get under the vehicle without jack stands. Hydraulic jacks CAN FAIL and can cause serious injury or even death. Don’t mess around!
2. Open oil cap to speed up the draining process.
3. Remove oil drain plug with 17mm socket wrench.
4. Remove oil filter housing with strap wrench (or oil filter socket)
5. Remove old oil filter, and 2 o-rings.
6. Replace oil filter with new, OEM, oil filter, and o-rings.
7. Re-Install oil filter housing.
8. Install drain plug with 17mm socket wrench.
9. Fill up with OEM, synthetic 5w-30 oil (7 quarts)
10. Tighten oil cap
11. Start car for 1-2 minutes
12. Check oil level and add oil if necessary
*Recycle used oil/soiled rags at Autozone/Pep Boys*
**Perform this at your own risk. We can’t be responsible for your stupidity if you blow up your car!**
CREATE A THROTL ACCOUNT TODAY!
Website: https://www.throtl.com/enthusiast
FOLLOW throtl on Social Media:
Instagram: @throtl | https://www.instagram.com/throtl/
Facebook: @throtl | https://www.facebook.com/throtl/
Twitter: @throtlmktplc | https://twitter.com/throtlmktplc