When your project requires a little bit of tube bending, you’ll want to calculate the cost of the materials you’ll need.

To accurately calculate this, you’ll need to know how many inches of tube it takes for each degree of bend. This varies by the bender you use, the die in your bender, as well as the tubing.

First, you’ll want to mount the tube in the bender with the correct size die and set your pre-load. Then, mark a reference line at the follower on the tube. Starting at your reference mark, draw a line every 1″ down the tube for at least a foot. Be sure to mark which end is your starting point. Re-mount the tube making sure you line up your reference mark with the follower. Set your pre-load and zero out your degree-bend indicator on the bender.

Start bending the tube, stopping every 10-degrees of bend to make a new mark on the follower. You may want to use a different color marker so as to not get your marks confused.

Websites:

https://www.PowerNationTV.com
https://www.PowerBlockTV.com

Facebook Pages:

PowerNation – https://www.facebook.com/PowerNationTV
PowerBlock – https://www.facebook.com/PowerBlockTV
PowerNation Daily – https://www.facebook.com/PowerNationDaily
Detroit Muscle – https://www.facebook.com/DetroitMuscleTV
Engine Power – https://www.facebook.com/EnginePowerTV
Truck Tech – https://www.facebook.com/TruckTechTV
Xtreme Off Road – https://www.facebook.com/XtremeOffRoadTV

Twitter:

PowerNation – https://www.twitter.com/PowerNationTV
PowerBlock – https://www.twitter.com/PowerBlockTV

Instagram:

PowerNation – @PowerNationTV
PowerBlock – @PowerBlockTV

For more on PowerNation, check out PN+ at http://bit.ly/2oTCIyJ

source

By carmodpros

ANGELHOUSE | 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (CARMODPROS,COM)

2 thoughts on “How To Calculate Cost Of Material”

Leave a Reply