Previous video in the series: https://www.youtube.com/watch?v=PbsLo1EXjU0
In this installment I work on installing the reverse rotation water pump, the carburetor, the alternator, heater hose connections, and I attempt to install the AC compressor. Since none of this fits into a nice neat little video I decided to call this a “Final Fitting” video.
This is the part of the build that my seem less than glamorous, but it’s just as important as everything else. If you don’t have all these smaller systems working together, you’re not going to get very far.
Anyway, I’m hoping the tips you see in this video are helpful to you not only with your project car, but also with your other projects. How effective you are often comes down to your approach, and your tools come to think of it. Either way I wish you good luck and hope that you enjoy watching my video.
The #FairmontProject playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog
Camera: Brian Kast
Thanks for watching!
Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/67532-fairmontproject-final-fitting-part-1
Steve Darnell: http://www.welderup.com
The parts I used
Alternator: https://lmr.com/item/SVE-17046K2/Mustang-SVE-130-Amp-Alternator-Upgrade-87-93-50L
H2O Pump: https://www.summitracing.com/parts/edl-8840/overview/make/ford
Mishimoto Hose Kit: http://www.americanmuscle.com/mishimoto-radiator-kit-8693-man.html
AC 134a Kit: https://lmr.com/item/HW-19712C/82-86-Mustang-50L-A-C-Conversion-Kit-R-12-To-R-134A
Blow Through Carburetor: http://www.jegs.com/i/Demon-Carburetion/333/MAD-750-BTK/10002/-1
Related Videos
Removing the old engine from the Mustang: https://www.youtube.com/watch?v=5wINaHUrX7o&t=905s
Replacing the K Member #FairmontProject: https://www.youtube.com/watch?v=ezbTvonGpi8&t=790s
Installing the Front Stabilizer Bar: https://www.youtube.com/watch?v=9okDlsmIfWQ
Relocating the Battery #FairmontProject: https://www.youtube.com/watch?v=IF8cHIjmUY8
#DarkMatterPikachu on the Dyno: https://www.youtube.com/watch?v=UADOHm6-BJc
Engine Balancing Video: https://www.youtube.com/watch?v=XjuGkXpha8Q
**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Google+: https://plus.google.com/100195180196698058780/posts
Instagram: http://instagram.com/ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.