This video is Part 7 in the final assembly of the #FairmontProject.
Extended Version (contains 15min of extra footage) Found Here: https://www.ericthecarguy.com/exclusive-videos/73-exclusive-videos/2382-fairmontproject-final-assembly-part-7-the-fuel-pressure-regulator-and-power-steering-cooler-extended-version-exclusive-video
#FairmontProject Final Assembly (Part 6): https://youtu.be/ed1sWB4eRR0
Cars like my Fairmont are built over time. In the case of the Fairmont, it took about a year and a half. During that time there are a lot of ‘little’ things that need to be addressed. Things you might not think of at the onset of your build.
I’m hoping the detail found in this video series can help you overcome some of those ‘little’ challenges. Me, I’m proud of my power steering cooler and fuel pressure regulator mounting. They’ve both served me well and I haven’t had any issues.
My Patreon Account: https://www.patreon.com/EricTheCarGuy
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog
Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1?sub_confirmation=1
Thanks for watching!
The Fairmont’s Hot Rod Article: http://www.hotrod.com/articles/eric-car-guys-turbo-fairmont/?sm_id=organic_fb_HRN_trueanthem&utm_campaign=&utm_content=5ac8494f04d3014862758057&utm_medium=&utm_source=
Parts
Fuel PSI Regulator: https://www.jegs.com/i/MagnaFuel/665/MP-9690-BLK/10002/-1
Fuel Log: https://www.jegs.com/i/JEGS/555/110828/10002/-1
Fuel Line: https://www.jegs.com/i/Mr-Gasket/720/206008/10002/-1
Fittings were -8 A/N
Fuel Pressure Gauge: https://www.jegs.com/i/JEGS+Performance+Products/555/41510/10002/-1
My Accessory Drive Kit: https://www.cvfracing.com/ford-5-0l-5-8l-serpentine-conversion-kit-alternator-power-steering-a-c/
PS Return Line: https://lmr.com/item/LRS-3713AB/Mustang-Power-Steering-Return-Line-82-93
Tools
Kool Tools Hose Assembly Tool: https://www.jegs.com/i/KOUL-tools/581/681/10002/-1
Hose Assembly Kit: https://www.jegs.com/i/KOUL-tools/581/681K/10002/-1
Adjustable A/N Wrenchs: https://www.jegs.com/i/Proform/778/67729/10002/-1
Hose Assembly Lube and Sealer: https://www.jegs.com/i/JEGS/555/28010/10002/-1
Angle Drill: https://www.jbtoolsales.com/aircat-4337-3-8-reversible-angle-drill#oid=1002_1
Related Videos
The #1 Cause of Fuel Pressure Problems: https://youtu.be/3n_X8cbdJ64
ETCG’s Compressed Air System: https://www.youtube.com/watch?v=6Nmz5Pytsi0&t=2s
#FairmontProject Final Assembly (Part 5): https://youtu.be/TZ8clQEpzzE
#FairmontProject Final Assembly (Part 4): https://youtu.be/cnfsExLP5XE
#FairmontProject Final Assembly (Part 3): https://youtu.be/xd1SIaknKLE
#FairmontProject Final Assembly (Part 2): https://youtu.be/u1VQkkSVs6U
#FairmontProject Final Assembly (Part 1): https://youtu.be/WtApfeHJapc
Bead Rolling Tubes: https://www.youtube.com/watch?v=h7P3E0WQgRY&t=351s
The #FairmontProject Playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs
**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Google+: https://plus.google.com/100195180196698058780/posts
Instagram: http://instagram.com/ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.
7:55 way over enginer bracket lol
I like this car and I like what I can see of your mods. Reminds me (at my age) of the 62-3 Chevy II base model 2 door sedan with all the ways you could go to modify it. A picture of a 62 Chevy raised up a bit with a straight front axle and a larger but not outrageous size engine up grade makes me smile. The look of a bench seat with a Hurst shifter with a patterned white ball just brings me back to those days. Your Fairmont could easily be a newer version of that 62 Chevy II base model 2 door sedan with a rum, rump cam and a 5 or 6 speed Tremec manual transmission (a little pricey) with a 411 rear gear with some tubby tires. I haven't explored any of your video's about what you did to this model but I'm very, very much looking forward to going through them.Take care and thanks for your time…Rob (ex Bronx boy)
so you stopped with the Fairline?
Those jegs an fitting with the swivel are almost guaranteed to leak.
Gotta love house hold hose clamps
I love that plug assortment box
Great installment video Eric
Sadly YouTube is in the midst of a huge purge of content providers and it is vitally important for all of us to stand up to a streaming service that stifles free speech and open expression. I encourage everyone, no matter what kind of content you create, or what kind of content you like to watch, to stand up and let YouTube know this is unacceptable. Don’t tolerate one content provider being removed because it’s only a matter of time before they come for your channel and it’s content!
You should do a series where you talk about old stories of working on cars or easy installs that went terrible wrong
Hi, how would I go about cleaning a fuse box that is next to the engine? Its got dirt and debris in it. Mainly from trees like pine needles and such. Vacuum, can air or just take it out of the engine and shake all the stuff out? Thanks.
OMG that Old Fart is Eric .. time flies !!!
Saw her at Carlisle!! Took a double take!
😠Nobody has 97 Geo metro 1.3 parts.😢 Do u know a website that has everything Geo?😖
Hey, Eric. Saw the Fairmont at the Ford Nationals at Carlisle. Good job.
Great video Eric, sorry to hear about the truck.
Why not just use the fuel bracket to mark holes on the shock tower and drill them out and simply bolt it directly to the car from the other side? KISS principle
probably covered it in the video and i missed it, or someone already commented.. but be careful with that rubber line.. ethanol eats the shit out of it.. gotta buy that $10 a foot PTFE stuff now..
There are alot of air heads in the comments lol
Oooh I luv the motor design easentially adiquit
Dumb question why is it so important to use aluminum wrenches verses regularly steel wrenches?