Thank you for watching! Links to stuff talked about in the show below.

The next live hang out is scheduled for June 8, 2016 at 7pm EST. Check my Google+ page for details: https://plus.google.com/b/100195180196698058780/100195180196698058780/posts

In this show we talked about long cranking times, Wheeler Dealers, the direction of ETCG in future videos, Fixing it Forward, cooling system problems, using stop leak, tool reviews, do you need a scan tool to bleed brakes, my Acura Vigor, windshield wiper problems, stalling in traffic, fluctuating tach at highway speeds, O2 sensor codes, automatic transmission problems, suspension noises, upper control arms and what they do, fuel pump noise, is my car worth what I put into it, getting more power out of your vehicle, and what my thoughts are on vehicle technology.

If I didn’t get to your question I apologize. Questions posted after the event ends will not be answered. Questions posted to the YouTube video will not be answered. Next show is June 1, 2016 7pm EST though, or visit EricTheCarGuy.com 24/7/365.

The best place for answers to your automotive questions: http://www.ericthecarguy.com

Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/63988-etcg-answers-questions-live-67-ama-5-25-2016

Fairmont Updates Here: http://www.ericthecarguy.com/blog

Looking for used car parts?: http://car-part.com

HumbleMechanic: https://www.youtube.com/user/HumbleMechanic

Thanks for watching!

Videos Mentioned

How To Check Fuel Pressure: https://www.youtube.com/watch?v=AeVTZz0od7Y

What’s Inside a Fuel Pump: http://www.youtube.com/watch?v=QbzEeWy1b3o

Does Stop Leak Work?: https://www.youtube.com/watch?v=76GpMD4LIwY

Solving Performance Problems 1: http://www.youtube.com/watch?v=rsGTeWayqIU

Solving Performance Problems 2: http://www.youtube.com/watch?v=sAKwCzUE_9M

Solving a Spongy Brake Pedal: http://www.youtube.com/watch?v=KIQIBLGoZJ4

The Basic Parts of an Automatic Transmission (Part 1): https://www.youtube.com/watch?v=JGbsgpp2YJQ

The Basic Parts of an Automatic Transmission (Part 2): https://www.youtube.com/watch?v=0Qf6O0oAs7U

How a Torque Converter Works: https://www.youtube.com/watch?v=pTfipsejqS0

Diagnosing a Clutch: http://www.youtube.com/watch?v=h7JJ_g2UuBI

Useful articles.

Engine overheat: http://www.ericthecarguy.com/faq/what-to-do-when-your-engine-overheats

No start problems: http://www.ericthecarguy.com/faq/solving-automotive-no-start-problems

Idle issues: http://www.ericthecarguy.com/faq/solving-automotive-idle-problems

Performance issues: http://www.ericthecarguy.com/faq/solving-automotive-performance-issues

Diagnosing Noises: http://www.ericthecarguy.com/faq/diagnosing-noises-in-your-car

Diagnosing Vibrations: http://www.ericthecarguy.com/faq/determining-the-causes-of-vehicle-vibrations

Electrical Problems: http://www.ericthecarguy.com/faq/solving-automotive-electrical-problems

Brake Issues: http://www.ericthecarguy.com/faq/solving-brake-problems

Transmission issues: http://www.ericthecarguy.com/faq/solving-transmission-problems

HVAC problems: http://www.ericthecarguy.com/faq/solving-automotive-hvac-problems

Buying a Used Car: http://www.ericthecarguy.com/faq/what-to-look-for-in-a-used-car-purchase

Leaks: http://www.ericthecarguy.com/faq/finding-and-fixing-leaks

MPG: http://ericthecarguy.com/faq/finding-and-fixing-the-causes-of-poor-mpg

Social Network Links

Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts

Twitter: https://twitter.com/EricTheCarGuy

Google+: https://plus.google.com/100195180196698058780/posts

Instagram: http://instagram.com/ericthecarguy

Stay Dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

source

By carmodpros

ANGELHOUSE | 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (CARMODPROS,COM)

50 thoughts on “EricTheCarGuy Answers Questions Live #67 (AMA) 5/25/2016”
  1. Change that needs to take place: LED displays are damn cheap, people. What's with printing cryptic codes for errors? Print the meaning of the code instead. Hide it in the engine bay if it's ugly. I don't care. But don't make me attach a diagnostic tool just to get a line of text from a car that comes with several displays already.

  2. hey eric love the videos and answers ,,, sometimes I think you should do a combined show with another car guy on a project ,,, like night n day maybe you should get in touch with tom from TOMS TURBO GARAGE , sorry to say I found him before I found you and I loved his thoroughness especialy on that miata he did ,,, I found you with your older videoa when ur hair was long and it looked like u wer working out of your home garage ,,, yes I think your new image is great ,,, looks like a Richard rawlings relative  , great look ,,, and maybe you should change the name of your show to ERIC THE CAR BRO ,, LOL I don't know just shooting in the dark man ,,, but yeah ,, keep up the great work , I look forward every week to watch ya ,, your like a brother I never had

  3. Is copper legal for brakes? In many countries I didn't think so. Also all brake lines require double flairs.
    Replacing the lines with the same as factory material would be my recommendation.

  4. Hey. I have a question about a truck that I have. It's a 1990 F-250 XLT Lariat 351W. When I drive about 45mph and it goes into the overdrive gear, when I press the gas pedal to maintain the speed of 45mph the truck shakes and sputters. Only around this speed in the overdrive gear it does this. I had a 97 f150 Manual transmission that did a similar shake if you tried to floor it when in too high of a gear (5th gear at 25mph for example) It doesn't feel like the truck wants to die and it goes away immediately once it downshifts. And above 55mph there isn't a shake anymore in that overdrive gear. Any idea what might be causing this?

  5. Hi Eric. Awesome show. What will you do with the inline 6 and the C4 transmission from the fairmont? They should be put in another project since the inline 6 is bulletproof.

  6. your awesome man i like watching and like how you explain and show real problems and solutions especially as i am the yougest tech in my shop i love the knowledge and tips u give . keep it up bud you a G . do more chryslers plz haha

  7. Eric, Airtex fuel pumps are in my opinion junk,I've put (3) in my dodge pickup in the last 5 years and I don't run the tank below 1/4 tank but since it came with a lifetime warranty I'll keep changing them out.I wish i'd have known about Airtex before I purchased it but we live and learn.Thanks for the channel, I've become a better diyer watching you.

  8. Eric why do you think that in Europe we have more hand-cranked car windows than in the US? I mean, the times when the base model of a cheaper car still had crank windows are pretty much over since about 10 years. Some had them still in the back, while the front windows were motorized, but that's also about gone (I'd say you'll have a hard time finding a used car from 2010 or newer that still has them). With the only exception of the "El Cheapo" brands of certain manufacturers, like the Romanian 'Dacia', a Renault daughter, or the Slovakian VW daughter Skoda. Both specialize in very cheap vehicles (in fact, you can get a Dacia base model for around 8,000€, while Skoda is around 12 grand I think). But even if you buy a crappy VW Polo for around the same amount of money, it will already have hand crank windows. And basically nobody buys the cheap base models of any kind of vehicle over here, they are all just there to lure the customers to buy higher models (in Europe it's much more common to buy a new car "built to order", while dealerships usually don't stock many vehicles, because customers don't like not being able to configure their new car).

  9. I agree with your stance on swapping auto to manual transmission. However in the case of my 1991 toyota supra turbo, it was as easy as dropping the auto trans and installing 5 speed along with the other essentials such as flywheel,clutch,master and slave cylinder +inside pedal. The only thing I had to do to the harness was bypass the neutral safety switch! She runs mint now! But as i learned in your recent Acura 6 speed video the auto engine had a different cooling system and harness issues along with other nightmare problems. I guess i got real lucky with my supra! Old toyotas are like legos. I can throw a Toyota truck diff in if i want, or say i want to put lower compression turbo pistons into a non turbo block + non turbo rods they all fit perfectly! Also I just turned 18 and I love all of your videos man! I always learn so much from watching you work. Wish you the best of luck with your fairmont project!

  10. Anyone that knows why this happens please comment. i got 07 chevy uplander 139K on it. I can be just taking off from home or at a stoplight and it feels like the tranny slips/ studders then slowly grabs all other gears are normal But, once when i changed the air filter i forgot to reconnect the MAF while that was disconnected no slips at all hooked it back up slipage came back… Any ideas?

  11. I got a 2005 Dodge Ram 1500, Magnum V8.. Don't know much about them, but whenever I am on the freeway heading 60 and try going to 80, it takes too long to accelerate, I even have my foot all the way down the pedal, only works when I press it down really hard, on V8's you can even do a burn out, but no with mine, it doesn't even accelerate like it's suppose to.. With other Rams its no problem, only with mine. Could it be the transmission?

  12. no question, just want to say thank you for doing what you do please keep up the good work. i do find some of the non-automotive repair questions entertaining (probably no more than were in this video though) i look forward to seeing more Fairmont videos and definitely enjoyed the engine replacement series. dont go torturing yourself to soon with an auto to manual transmission swap! get your sleep and stay dirty

  13. Hey Eric, great videos. WRT your dad's truck…family's important and you should move forward with helping your dad rebuild that truck (not that my opinion really matters in this regard).I'd like to see you and your dad rebuild the truck.

  14. Hi my Holden vz is sounding like a tracker? But if I pull over an turn car off it goes away for a bit HELP

  15. I think the build show would be awesome! Way better than engineering explained and with less gray hair!!!
    P.S. I still like you Engineering Explained Guy

  16. I don't mean to be smart but I think the gut is from all that beer and pizza and fried food in the past lol that's why i have a gut. I no longer drink was a heavy beer drinker for a good few years my problem is mostly eating the wrong foods even though they taste so good haha.

  17. hair I usually watch a lot of your videos when it comes to learning how to fix something correctly I really appreciate how you going to detail and you explain everything I really appreciate how you explain how the thing works first because like you always say in order to be able to fix it you have to know how it works. What I would like to know is how do I get more performance out of my 5.4 liter V8 Triton motor it is a Ford and it's a 2003 I don't have a lot of money but I would like to do a few things to it to make a little more pep you a little bit more responsive and I would like to try to give it more horsepower but like I said I'm working on a budget if you could please give me a few tips I greatly appreciate it take your time as I am in no big rush.

  18. I used to have a 1980 Mercury Zephyr with the exact body style of Oliver but two tone Gold on top half and cream on lower which I had from 1997 til 2001 which it got backed into by a careless guy in a pick up truck, it still ran but only had the left headlights and I drove it to the Drive Inn Theatre before I used the insurance money I got for a 82 Red Fairmont Futura fastback which timing went out and so did the funds to fix it.

  19. Floyd truck hesitate when driving some time is it clutch or fuel problem changed slave cylinder and changed fuel pump recently and filter may be vaccum line s can't figure out don't know what to do

  20. 98 Windstar 3.0 when shifting or breaking I hear a clunk on right side …. passenger front!

    what's your first thought. checked brakes they look great… transmission check.

Comments are closed.