Cleaning Up The Oil System On A 4.3L Chevy V6 – Engine Power S8, E20

1. no safety gogles?😂

2. Pat Ross made me spit my drink out man

3. Is there an aluminum LS version of this motor?

4. The skit was hilarious lol

5. super expensive machine to hone the cylinders. cheap chinese "doesnt last" water pump. tf?

6. Pat i love your hair.!!!!!!!!!!

7. Bob Ross? 😂😂😂

8. I would never have the balls to start cutting on a block like that.

9. You all need to do a 2.2 tear down out of a junkyard

10. This was an awesome video. My favorite part was seeing the parameters on the honing machine. I am an aerospace machinist but the equipment you guys have for machining engines looks much more interesting.

11. I Always Really enjoy your show & really appreciated the Bob Ross impersonation too… the hair was a little bit too much at first 😳 your wig looked great-you looked just like him LOL… But if you watched him for very long you got Hooked… he made it look and sound really simple! And your point about his paintbrush making that crunching sound as he turned the little marks into perfect pine trees was really funny too cuz that Was All you heard when he wasn't talking!😄
    …the best part of his show for me is that after watching him intermittently for several years, I came to find out WHY he was so gentle & soft-spoken… SO FULL OF PEACE😐
    …the answer is that- he had BECOME a Born-Again BELIEVER in THE Lord Jesus Christ 😁…(as his Personal SAVIOR!)
    I know that's what Hollywood all the Democrats and some people NOW Call Politically Incorrect, and makes you racist and all this other baloney (esp. if you Love the USA RIGHT?)!
    …my answer to them is that 'God is NOT racist! -WE ALL GET TO MEET HIM!!' NOBODY…nobody gets out of THIS Alive… (*We
    Are. ALL- Going-To-Meet Him!! AS SAVIOR, OR AS OUR JUDGE… WE GET TO PICK/ CHOOSE HERE & NOW…Whether we believe it, like it, or even care!! None of that changes one single solitary thing. Face-it… I am not God- & you Are Not God… *(Buddha never claimed to be God he didn't die for anyone and never rose from the dead to prove he was God !!…
    And this whole lie about a religion of Peace… where they take people and cut their heads off on a beach with a big butcher knife… like cutting chickens heads off for dinner? that's Islam!… which means Submission- strangely yeah that's a God who needs us to die for him will you know what I don't think so!) If we're honest ONLY GOD IS GOD… always has been always will be. He's not far away, you can know him! Get out your Bible and READ the GOSPEL of John ((**and Ask God to Show you if He is Real… & See what happens if you are sincere.))
    He changed Dr. Ramirez life for The BETTER way way way .. I can't even begin to tell you😂💃👌👍

12. Who else caught pat tappin the block to let buddy know stop looking at the block and pose for the camera 🎥

13. Depending on year of 4.3,could swap in the 96-up vortec heads on the 95-down 4.3. Much like its bigger sbc brother,it really helps.

14. Ol Pat gonna rub that skin off his hands

15. The bob ross moment made the vid lol

16. Where did she go?????

17. Who needs 6/7 ink pins a full police belt to rebuild engines🤔

18. Nice to learn about but in reality, no one has million dollar hone machines sitting around they didn't know how to use I wouldn't think? But because you went there and did the whole Bob Ross deal, your forgiven lmao! So do they actually have a white Afro wig named "The Bob Ross" or Is that just any old afro off the shelf at the costume shop? Lol! He was always on PBS or channel 13 on the old dial TV sets in NYS along with Sesame Street and Reading Rainbow lol! Good times to grow up in that's for sure. We still went outside and built shit with our hands and used our imaginations to play with ourselves or others neighborhood kids. Bob was an inspiration to our generation believe it or not. Nothing like "Happy little Trees" everywhere!

19. Your little tool cannot measure accurately down to 1 millionth, sorry. Not even 1 hundred thousandth. Any measurement at that size must have a critical temperature call out. The environment, the part, all the associated tooling must all be within usually 1 tenth of a degree of the called out nominal temperature. example 70+0.0/-0.10degree F. So, 70.0 to 69.9 degrees F. Further, no "hand held" measuring instrument could ever get repeatable measurements down to that small.
    As a former Navy SubSafe inspector at Torington Bearing before Timken bought them out, I can tell you with absolute certainty the you NEVER made and accurate measurement down to that size in your shop. Never. Further, it's extremely unlikely you ever needed to. Navy measures the lash (the slop) in bearings for submarines to assure they run as quiet as possible. Every bearing ball, every lash measurement, then listen to them in operation. All in very tightly controlled temperatures, and it is still next to impossible to duplicate those measurements from Torington/Timken Labs to the Navy's Lab. Created quite the pissing contest between them at times. There's nothing on a car engine that needs that close of tolerance anyway. Thank God.

20. OMG, I just about died laughing at the Bob Ross skit

21. Let's see a 5.7 liter V 6 gm engine.

22. Its not Swirlport, its a Vortec Head.

23. Lmao loved the Ross bit

24. it's oil "Galley" not "Gallery"
    how many pens does he need ? ? ? i can see two or three but 20 . . . c'mon man, you know the thing.
    berrymans's products are the exactly like seafoam products but at a fraction of the price of seafoam.

25. Seriously following this series on the 4.3L build. I has a 4.3L that I want to give a refreshing with performance upgrades for my 04 S10 crewcab daily driver. That's going to sit on a solid axle swapped front end with a XJ dana 30 and ford 8.8 out back on 33×12.5-16 tires.

26. The 4.3 legend.

27. Hey Guys, great video, I’ve got two of these little girls in my 10,000 pound Sea Ray 290 Sundancer and they perform great. I’m in the process of getting a core and doing what you guys did. A boat vid would be great! Jon

28. I lost it at the Bob Ross bit.
    😂

29. Had a 4.3 in my 2002 Chevy Blazer, always wondered what kind of number one would make when Hopped up.. Would like to see a build on this engine.

30. Duralast sensors are not to be trusted.

31. Porting polishing heads I been doing my self in curcke track cars since I was 11 I been driving asphalt circle track cars in the mini stock class 4 cylinder 3.0 Ford 2.3 mustang huge holly 500 carb 410 lift mouse trap springs bullet rods and pistons turning 469 ho to rear end and 11k rpms raced those on asphalt from 8 to 11 then went to outlaw latemodels ever since I'm 29 now.

32. Please revise the ENGINEPOWER graphic to have HP/TQ converging at 5252 RPM. Other than that, thanks for the info.

33. 11:44 "I'm just living in the 80s, man…" 😆

34. 😂😂😂

35. lmao @ Pat-Bob merge.. Just awesome!
    The Bob Ross documentary on netflix was awesome and sad (Ross family got screwed over by Bobs partners) Thus always check your "will" and no question is stupid when asked/role play with the attorney drafting/doing the "will" to make sure that your family doesn't get screw in the event of a untimely passing, always use a local attorney (its ok to shop around locally/county/state) to your area (they keep current with the laws surrounding such issues).

36. itty bitty baby block

37. 🇮🇶🥰

38. I would really like to see you guys build this little 4.3. I’ve got a 4.3 in all of my S10 blazers.

39. I have to admit Pat Ross was funny!!! 😂🤣

40. The Pat Ross bit was real funny. Wanna see you guys have more fun with the show like that.

41. Where's Mike at ?

42. Yes sir little watch this video a couple times

43. excellent episode, guys! the bob ross skit was a hoot too.

44. You should bore it with a boring mill then hone it. Location is proper, and the finish is proper. Stops that distortion problem and chatter too

Comments are closed.