Carburetor Rebuild Basics covers the basics of rebuilding a carburetor. Now there are a LOT of different carburetors out there so this video won’t apply to all of them, but it will give you a general idea of what you would be in for if you decided to rebuild one. Me, I like rebuilding carburetors. There’s something about mechanical things like carburetors that interest me. How even the smallest part has a big effect on the overall operation of your engine. Since we’ve gone to fuel injection carburetors have become somewhat obsolete. I’m still a fan though. I may be a little rusty on this stuff since I haven’t done this in some time but I hope this video helps you just the same. If nothing else, I hope you’re entertained by it.
Camera: Brian Kast
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Related videos.
Carburetor Rebuild Basics (Part 2): https://www.youtube.com/watch?v=dprLQcQrAqE
If you want to see the full version of this video with additional footage now, become a Premium Member of EricTheCarGuy.com: http://www.ericthecarguy.com/premium-content-streaming-etcg-content
The Basics of Carburetor Adjustment: To be added August 8, 2014
Cleaning Throttle Bodies: https://www.youtube.com/watch?v=41yFXjibtLY
Solving Performance Problems 1: http://www.youtube.com/watch?v=rsGTeWayqIU
Solving Performance Problems 2: http://www.youtube.com/watch?v=sAKwCzUE_9M
Re Performance Problems: http://www.youtube.com/watch?v=_vAJi5rLMGY
Related articles.
Idle issues: http://www.ericthecarguy.com/faq/solving-automotive-idle-problems
Performance issues: http://www.ericthecarguy.com/faq/solving-automotive-performance-issues
Getting Better MPG: http://ericthecarguy.com/faq/finding-and-fixing-the-causes-of-poor-mpg
Discussion about this Video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/52544-carburetor-rebuild-basics
The best place for answers to your automotive questions: http://www.ericthecarguy.com
ETCG FAQ Page: http://www.ericthecarguy.com/faq
EricTheCarGuy code lookup: http://www.ericthecarguy.com/obd-code-lookup
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Google+: https://plus.google.com/100195180196698058780/posts
Information on Premium Membership: http://www.ericthecarguy.com/premium-content-streaming-etcg-content
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Ah how the memories come flooding (is that a carb pun?) back! That choke was the bane of my existence.. The exhaust gas would eat away at the little fingers on the end of the choke plate axle that engaged the spring, and sooner or later the little fingers would break off and the choke would no longer work. And, of course, that was something that was NOT included in the rebuild kit. So, every couple of years you just got used to replacing the water pump and the carb. Fortunately neither part was very expensive nor very difficult to replace.
I know this is 6 years old, but I'm commenting anyway! 😉
I MISS Carburetors!!
I'm a Retired Ford Tech, ASE Certified as a Master Tech in Carburetion and Fuel Systems.
Going through these old Videos of yours is making me want to get an old Car, just to mess with.
Even going to a Auto Wrecking Yard and getting a few Carbs, just to rebuild/modify!!
Now I know you want nothing to do with that 200ci Stovepipe Engine, but back in the day we used to swap those Holleys for the Carter 1bbl off of a 300ci 6cyl Ford Truck. They're almost 100cfm larger and significantly improve torque.
Bolts right up, and all linkages fit the same!
I’m about to rebuild my 78’ Honda CVCC carburetor on my own. I’ve never done a rebuild nor do I really understand what everything does but I am going to attempt it.. as long as i keep my GoPro recording on my head throughout the whole thing i should be fine.. maybe.. lol
I watch carburetor rebuild and I have a toyota paseo electronic fuel injection. Seems legit. (I like Eric's videos 😉
My carburetor is also like what goes in the toilet!
Is he on heroin? Why does he keep looking around and blinking so slowly?
Does anyone know what the brass tube to the right of the spring at 20:24 is? I snapped mine by accident, first carb rebuild
Never rebuild a carburetor without checking gasket surfaces for flatness/straightedge
Sending my full support. Do the same thing..thank you
Your knowledge and expertise are great to watch.
I am so glad I watch wrangler star (either him or sensible prepper I forget which) as I used to watch you for one of my classes and I could not remember your channel name but he recommended your channel for learning about car stuff and that makes my week
They need to add a x3 speed…
"Now know that carbutetors still have gas in then even after they're removed"
laughs in sat for 25 years
my 85 grand marquis CFI used a wire off the alternator connected to the choke
For some reason when I set the float right and start up my engine I’ll let it idle for a minute or two then when I turn it off for like 10 seconds and try to turn the ignition it won’t run could someone help me please?
Holy sh$$t I never knew carbs were such a b$$ch to work on.. i'd rather swap..
What carburetor is it?
Since I don’t have a dad to teach me about cars…
Awsome job, Eric and Brian. God bless.
Amazing what this man can do with Stanley and Harbor freight screwdrivers and 2 adjustible wrenches. No expensive Snap-on , Mac, Matco and other super expensive tools. He relies mostly on his knowledge and wisdom " take pics" , also his enthusiasm plays a big part on his success. I messed up , didn't do what he's advocating. I wish l had seen this video before l started messing with my carb. Now l have a disaster, springs all over my garage and my little balls are now smaller.
Carburetors along with analog vinyl records, video cassette, mechanical devices with linkages and springs, etc.
Mp3, blue ray, 4k streaming and other digital format and fuel injection are electronic computer controlled devices.
Those things are contraptions..
I once did a rebuild on my small lawnmowers carb so that obviously means I can take my trucks carb apart no problem EZ PZ
If only i could rebuild my asshole like you can rebuild the carburetor. I need an extensive overhaul. been running very rich of late and no matter how many screwdrivers i shove up there it just keeps on spewing gas and liquids