Pat and Mike team up with Dupli-Color to build an old skool street rod with Factory Five Racing’s ’33 hot rod kit.

PARTS USED IN THIS EPISODE:

Design Engineering, Inc. (DEI): Heat Protection, Acoustic Insulation, Boom Mat, 12 1/2 in. x 24 in., Self-Adhesive, Set of 20
More Info: https://pntv.us/pn_pt_1831

Dupli-Color: Paint, Metallic Coating, Enamel, Textured, Silver Metallic, 11 oz., Aerosol, Each
More Info: https://pntv.us/pn_pt_1821

Dupli-Color: Paint, Spatter, Enamel, Textured, Black/Gray, 11 oz., Aerosol, Each
More Info: https://pntv.us/pn_pt_1819

Dupli-Color: Paint, Wheel, Acrylic Enamel, Satin, Black, 12 oz., Aerosol, Each
More Info: https://pntv.us/pn_pt_1827

Dupli-Color: Paint, Lacquer, Matte Clear Coat, 1qt., Each
More Info: https://pntv.us/pn_pt_1834

Dupli-Color: Paint, Paint Shop Finish, Lacquer, Gloss, Jet Black, 1 qt., Each
More Info: https://pntv.us/pn_pt_1833

Dupli-Color: VHT, Paint, Roll Bar, Epoxy, Satin, Black, 11 oz., Aerosol Spray Can, Each
More Info: https://pntv.us/pn_pt_1825

Dupli-Color: Primer, Paint Shop Finish, Lacquer, Flat, Gray, 1 qt., Each
More Info: https://pntv.us/pn_pt_1832

Dupli-Color: VHT, Paint, Flameproof Coating, High-Temperature, Satin, Clear, 11 oz., Aerosol Spray Can, Each
More Info: https://pntv.us/pn_pt_1824

Dupli-Color
Wax and Tar Remover, 11 oz., Each
https://pntv.us/pn_pt_1823

Stop Tech
Brake Pads, Street Perfomance, Aramid-Fiber Metallic, Set
https://pntv.us/pn_pt_1829

Stop Tech
Brake Pads, Street Perfomance, Aramid-Fiber Metallic, Set
https://pntv.us/pn_pt_1830

Dupli-Color
Paint, Brake Caliper Paint, Blue, 11 oz., Aerosol Cleaner, 8.5 oz. Brush-On Paint, Kit

Factory Five Racing,Inc.
The Factory Five “33 Hot Rod comes with all of the parts you need to build your car except for the engine, transmission, rear-end and paint. Complete kit, with optional 18″ and 20” Salt Flat Wheels – Gray, with 245/40/R18 and 295/30/20 TOYO Tires

Loctite
598 Black, High Performance RTV Silicone Gasket Maker, 300 ml Cartridge

The Industrial Depot
Industrial Depot – Fasteners, Hardware, And Shop Supplies

WD-40
Aerosol, 12 oz., lubricant, water dispersant, penetrant, protectant

source

By carmodpros

ANGELHOUSE | 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (CARMODPROS,COM)

35 thoughts on “Build a Kit Car with ONLY a Drill, Pop Rivets, and Rattle Can Paint – Engine Power S2, E10”
  1. Cette machine qui a une origine, outre Atlantique, ressemble étrangement à cabriolet Rivoli sur base Citroën qui pourrait voir le jour dans un futur proche !!!
    Le Meilleur pour les temps Futur !! Asta Luego ………

  2. Шикарный Хот-Род, почему сейчас, когда есть электро мотоциклы , на мотор колесах, ни кто не делает Хот-Род на электрических мотор-колесах???❤😢😅

  3. 4 years latter- A real benefit of these kits is the possibility of a very cheap and practical A to B vehicles by going the low hp route, AKA some of the light vehicles out of the UK using motor cycle engines.
    Being built for larger engines may give them a large safety buffer over the lighter vehicles when smaller engines are fitted.

  4. I love and completely agree with your list. The last quality of a Sense of Humor is my most important one as well, but unfortunately in my almost 46 years I have yet to meet someone that could match my sense of humor. I do look forward to that.

  5. To those poo pooing Duplicolor rattle paint. The key is proper body prep. In 1993 I Dulicolored my 84 S10 Blazer. After final polishing nobody could believe I did it myself. It still looked good after 7 years…red is a difficult color for longevity. Total cost $200 for paint, primer and sandpaper and 20 hours work at home.

  6. This video completely full of shit top to bottom! It takes a Hell of a lot more time, money and a really good Skill Set to even begin one of these Factory Five kit! Don't let the Bullshit fool you!!!

Comments are closed.