1997 Subaru Legacy JDM Headlight Installation

1. 97 legacy headlights will fit in a 1998. I know the 1997 are one piece with the sidemarkers integrated. The 98 and 99 the side marker and headlight were two separate pieces but they are plug and play and see overall fit and dimensions. Just FYI. Only thing different Is if you get projector style vs stock halogen

2. Как по английски "рукожоп"?

3. Hi eric good morning… I just want to know how much cost for the headlight could you help me buy one

4. why are headlights so expensive, even a set of ebay ones are over 100$

5. Long after the upload. But if you wire them up like you told does the "shutter" in the projector automatically works?

6. Anyone know where I can buy the headlights shown in the video?

7. That extra wire you capped of is the wire for the second horn in Japan

8. И почему дальний и ближний горят не вместе?!?!

9. Как же это печально что нет субтитров на русском😭

10. Eric

11. These fuckers are $300 USD now on ebay.. christ.

12. ive got a 96 and cant figure out this swap any help or links to the diagram u used

13. Hey Eric, not sure if you still check on your account or not but figured I'd ask anyways. I got these headlights for my Legacy, and when I connected that one small wire from the right over to the main harness, my DRL's are still not getting power. Instead, my main lowbeams are getting like 30% power, then when I turn my lights on they get full power. They effectively are doing the same job, but I would love to get those DRL bulbs to light up. Any help would be appreciated.

14. Got this exact car, which JDM headlights did you get? I want them!!

15. Anybody know the bolt size for the jdm projector fog lights? I can't find it anywhere

16. awesome! but are the JDM impreza headlights also projectors???

17. Eric did you ever check the positioning of the headlights? Because in Japan they drive on the other side of the road and you might be blinding everyone coming the other way.

18. your the master erick thanks a lot sir

19. your running lights turned off when u put on the high beams hope he seen that

20. wish my accord was that easy I had to take the bumper off to install my new headlights

21. Looks a bit wierd that the head lights should go off when turning the high beams on…

22. was I the only one yelling, "YOU CUT THE WIRE TO THE HORN!" lmao

23. I love watching your videos even you work on your Subaru model l I also have Subaru its 93 Impreza model l this video inspired me

24. good job great video thanks i have a 96 subaru myself so i learn a lot

25. Hey Eric Quick Question, Do you know exactly how the original fog lights for the 98 legacy gt are mounted in? don't know if im missing any fasteners under the bumber or something.
    If anyone could help?
    Its these lights here (but mine are used lol)
    https://encrypted-tbn1.gstatic.com/shopping?q=tbn:ANd9GcQRPBCSBPSi3RVLWJ6zTPWU_sYHkrQ8KZP_MifT15IH4wfQrrC8rw_Y5ViTlvOaYnvK9BRSgjQx&usqp=CAE

    Thank you!

26. I actually have a 98 Subaru Legacy, and plan on retrofitting the stock headlights. However, my current headlights are the 2-piece set for each side rather then just one whole headlight assembly. Where can I get those? Doesn't need to be projector JDM style, just want the 1 piece assembly for my retrofit.

27. YAAAAAAAAAAAAY!

28. Awesome beat while he's soldering!

29. I cannot believe I found this while watching MightyCarMods channel on the sidebar.

30. When you turn on your high beams, the lights flick back and forth several times between high and low. Was it like that with your stock lamps, or is that a new feature built into these JDM lights? I like it!

31. Two questions: 1) JDM means Japanese Delivery Market and the Japanese drive on the right side of the road, so wouldn't the freznel pattern possibly be backwards on these for U.S. roads?  How do you know these were for export to left-hand drive non U.S. market?  2) With the front amber lens now gone from your car, you might want to look into the JDM side marker piece that replaces the front two inch piece of black body molding in front of each door.  I know that BMWs are pre-wired for these with the connector taped to the harness right behind the fender – may be the same on Subies.

32. My friends jdm head lights. When u turn them on the turning signal and the low beam stays on. When u put high beam the high beam and low beam stays on. How do i do that.? He had a harness from a forum but how could i do it with out the harness

33. Aren't those lamps technically illegal since Japanese parts aren't DOT approved? Not that anything would really come of it, just a possible hickup for someone down the road.

34. Or instead of STI swap.
    Do an EG33 swap. =D

35. Eric is a pleasant fellow.

    and yes PLEASE DO AN STI SWAP….and yes Keanu it WOULD BE AMAZING.

36. JDM is the best!

37. please do an sti swap eric!!!!!!!! holy christ that would be amazing!!!!

38. Coating the tip before storage helps it last. Same concept as galvanized nails. Nice video!

39. Thank you very much Eric!  I've been going crazy trying to figure out how to replace my bulbs.  Turns out my mistake was reading the instruction manual.

40. ha I wired in my 1992 SVX's new stereo in minus 20C weather and didn't use shrink tubes big mistake cause a wire fell apart and I had to do it all over again do to the crazy lack of space

41. Sti swap please

42. Even a pair of new headlights can do a world of difference to make your older car look a little more modern.

43. where can i get these headlights?

44. thanks a lot , i just need is.

45. And im talking about the white things u said that will be easy to get off in the begging of the vid

46. How do i take out the faseners? Do i still have to life up the car to get them out?

47. I bought a gt bumper tht has fog lights, how do i hook that up with the headlights like yours? And dudee you should get the hood with the hood scoop your car would look bad ass ha

Comments are closed.