In today’s episode of Sorted, I will be fixing six oil leaks on my 2005 Mercedes C55 AMG. These jobs apply to about a dozen different models spanning about a decade. Basically, if you have an M112 or M113 engine from about 1997 to about 2008 most of these repairs apply. We will tackle valve cover gaskets, breather chambers, oil cooler seals, the oil filter housing seal, a pressure port seal and I go over the dipstick grommet seal.
I’m super excited to announce a totally free way that anyone can support the channel!! I was approved for an Amazon Influencer account which allows YouTubers like myself, and other creators to earn a small commission from sales generated from people first clicking on my Amazon link, and then buying anything from Amazon. This doesn’t cost you a penny as Amazon compensates the creators for driving traffic and sales to the site. So even if you don’t buy the product or tool that I link in the video description box, you are still supporting the channel by shopping on Amazon after you clicked through any of my links. Each video will have either specific links to things I use or talk about in the video, or you will see my general LegitStreetCars Amazon link like this. https://www.amazon.com/shop/legitstreetcars
Next time you need car parts, tools, diapers, condoms, fidget spinners or anything on Amazon think of good ole Alex from LegitStreetCars.
Check out FCP Euro for all your Euro parts needs and don’t forget they offer a lifetime warranty on everything they sell. I know, they’re crazy!!
https://www.fcpeuro.com/
Get yourself a cool Black Widow Parts Washer:
http://bit.ly/2rJ3wmo
The entire Black Widow Lineup – http://bit.ly/2rMT7WV
Alex’s Amazon Recommended list
https://www.amazon.com/shop/legitstreetcars
I used oil eaters for a cleaning solution and so far so good. Only $40 for a 5-gallon drum on Amazon. You only need about 4 gallons as this is a 4:1 water to cleaner ratio and it’s a 20-gallon parts washer. Takes 5 minutes to build.
https://goo.gl/MCbT1G
Here are the tools you need for these repairs. Links are just to give you an idea, I have many different brand tools in my arsenal but don’t be afraid to use Amazon for tools. I do all the time, like for that massive 46mm Socket.
3/8 Ratchet- https://goo.gl/GTjz4h
Extensions- https://goo.gl/s6AtXh
1/2 Drive Ratchet needed for Oil Filter housing nut- https://goo.gl/t6nuo5
46MM 12 Point Socket- https://goo.gl/bfi4JW
3/4 to 1/2 Inch Reducer for 46mm Socket for Oil filter housing nut- https://goo.gl/Qyrrk9
Cheap Screw Driver to turn into breather chamber scrapper- https://goo.gl/gesZ4H
Inverted Torx Set. You need an E30 but the set is good to have for any Mercedes- https://goo.gl/tEY1mt
Torx Sockets set for coil pack bolts and breather chamber screws- https://goo.gl/gsdp84
Oil Dipstick- https://goo.gl/vP7A3q
Some Torque Specs for ya.
Valve Cover Bolts- 10NM
Breather chamber Screws- 4NM
46mm Nut for oil cooler- 70NM
4 Oil Cooler Bolts- Around 10 NM, couldn’t find the exact spec.
2 Bolts for Pressure Port- Around 10 NM, couldn’t find the exact spec.