Repairs for Mrs. Murder Nova’s K5 Blazer + a Look at What’s Coming Up at 187 Customs!

1. Look at all the fords.

2. Do you look back and say to yourself and say …… what the fu** we got no oil pressure we should shut it down . Noo not Shawn leter rip tater chip

3. 9:30 got some of them honkers flying overhead? Eh! 33:07 Boy you sure do know how to clean a tool! 😳😂. TY Miss Erin for the job security and content for this video!

4. Add air scoops and ducts. The hose on center section to blow the air through the veins. Not on the rotor surface is best. Wet dry vac attachment is the air scoop. Check out track car builds

5. Make a working for proline shirt ! Moronation will buy them !

6. Bendix makes air actuated disc brakes

7. If the trailer and brakes are set up for 17.5 and your running 22.5s, that's your problem. What's the weight difference in the wheels. It's just burning your undersized break pads up

8. I'd be looking into air brakes for that thing. Losing it all over that dumb shit would be a damned shame…

9. I work at a part store try looking at a 2002 ford E550 with a 7.3l diesel they have an 8 lug even spaced lug pattern. Im not 100% sure but i figured they might work for you

10. Hit up diesel Dave

11. that looks like the hub on my f250, it is a 2001

12. not cheapish, you need north american made rotors. Stay away from chinese brake parts. What are the measurements on the rotors, I will look for them.

13. 1)Does everyone pulling a race trailer in NPK have these break problems???
    2)Can you put a new manufacturers heavy duty axles, rotors and breaks on your trailer?
    Just redesign and upgrade the whole thing!
    Good luck guys!
    Looking forward for NPK 7, good things are going to happen for you guys!
    🔦🏁💰🤑🇺🇸

14. Hi Guys I would never have air over hydronic brakes and I’m ex Trucker ,,find a conversion to full air ..Or go to drum brakes less headaches keep your chin up and let’s go in 2004 I feel a few wins coming cheers 🙏❤️😀💪👍🇦🇺🦘🇺🇸💰💰💰💰

15. That ac compressor has a 1/2 square hole to put a ratchet in, to hold tension while tightening down

16. Merry Christmas Phantom, Dalton, Shawn, and family love the square body videos and genral car videos. I also like the race cars

17. Southwest trailer should have a wheel nut socket,it will be a stamped steel with 3/4 drive square for ratchet.their a little thinner,but will work on pulling the nuts in hub out.

18. Passenger side trailer tires catch all of the potholes and ditches and rumble strips .

19. i mean thats a gm caliper you have on there id assume a gm dully front or rear rotor if you brought it to a good parts store they could match it up

20. Well…atleast your not building a SEMA car this year on top of everything else

21. I don't know how you can afford to do all this stuff. I understand you get paid to do what you do. But, thank you for our entertainment. I love the U-tube and the shows. I will never stop watching and buying merchandise.

22. 😂😂😂

23. I put the RTX gauges in my square last week! They're nice!

24. Man y’all got a driveway full of fords 😆 love the k5, keep up the good work!

25. Grainger, McMaster-Carr, AG supply carry 2 1/2” or 64mm 1” drive sockets. Grainger or McMaster-Carr will ship usually you’ll will have in two days I’ve ordered up to 3 1/2” sockets from them before I retired never had a problem getting sockets from them, try one of them it beats spending all day running around wasting time and never finding what you want. The size socket you needed usually cost about $60-$90 it’s a lot for just one specific job but when you need it you need it.

26. I believe I would get rid of that pos trailer and do something different $11,000 every 6 months F THAT.

27. Think of this one hemi exploding equals 3 small blocks worth of explosions and get another primary engine and a couple backup engines and on the side of caution you know that they can go 85 passes no problem and change them out at 85 passes and the block could have had a bad casting pour that some impurities and enough thermal cycles finally caused it to say here’s my 6 second notice

28. Hey guys, you should look up "MAN AXLES." we used them as trailing axels on buses, and it works great. Keep up the great work. Merry Christmas and Happy New Year

29. lmao no problem your lifters cost the same as my brand new 6.0 long block for my 08 Silverado

30. yo yo from the uk
    why dont you put line locks on each rear axl for them to be locked off if you ever had this problem on the road, so if you see a broken/cracked rotor you can lock the break line so you wouldnt e
    get more damage than just a rotor replacement
    just an idea
    peace from london uk

31. if I had to guess which channel would be most likely to show a dog shittin, this channel would absolutely be my first guess

32. Somewhere around 2000 Ford changed their 8 lug pattern, so the Kodiak rotor has the earlier 8 lug pattern that all used to have, For, Dodge and GM.
    I would think that maybe the older Ford E-250 rotor might work like the Kodiak except for the pattern.🤔

33. Wrap it instead of painting it. I know it would disappoint your Dad but, a wrap is a hell of a lot lighter than painting it.

34. If you want light wrap it and don’t paint it. Save over ten pounds.

35. If u need to know psi conversion call doc he should know the info he was a truck doctor

36. I had a 93 Silverado with a tbi 350 and it got 19mpg on the highway can’t knock it if it works

37. Man talk about morons!! It just a water pump !! lol just had put it out there !!!! You got all the Snap-on mechanic tools !! Then you say “ I’m not a mechanic “ 😂😂😂

38. Benpak has a 15 gallon drain pan for a 4 post lift

39. Don't do that don't do that you will screw up your pet breaks because it set for psi is reglated

40. You need to go to OKC truck salvage and look at drop axle for a truck and see if they are the same with then u can have air brakes all the way round

41. So as soon as you said the dimmer switch is in the column I said no. So it’s 3 mins in and I can tell you it’s down on the exterior of the column on the left side and is controlled by a rod like the ignition switch. But make sure it’s not just the rod being stuck. It happens. So northern tool sells a 2.5” 3/4 drive socket for $25 and not solid poo is easy do you have a water hose if not find a bucket. Just wash it down.

42. Have yall tested with Jimmy dales little wing on the car yet? Nova will be hard to beat now.

43. Most semi sized haulers with fully shrouded wheels will have vents to the brakes. Maybe look at ducting some air to the rotor to help a bit?

44. Phantom do you still have your big wheel wagon?

Comments are closed.