Building a Carbon Fiber Huracan Door Pt 1

1. Download Turo for free here: https://turo.onelink.me/1712264037/71506be8
   Use code BISFORBUILD for $25 off your first rental!

2. I know it's an old video but man it's painful to watch… Do more research..

3. Check out Easy cokmposites Uk, they have in-depth tutorials on how to build a carbon fibre bonnet or any other car panel for that matter.

4. use a heat gun to get rid of those air bubbles

5. Again check this out: https://youtube/dyj23IesF3s

6. Speak to Luka Magnotta for tips on vacuum bagging 🤣 Too soon?

7. Mate! For Carbon Fiber duplicate best instruction is "https://www.youtube.com/watch?v=UgKvDw1E60E" "How to Make a Carbon Fiber Car Bonnet/Hood – Part 1/3" Please watch it! Love your work! Please keep going!!!

8. “Gonna get the dremel”
   pulls out angle grinder

9. does this process work with fiber glass as well? If I wanted to make a mold of my over fenders would it be the same process but replace everything with fiber glass?

10. Im not a coder should you use it as a mould

11. The LEDs did me dirty in that time laps

12. Loving the build ❤️

13. You can actually salvage your door by using super glue and baking powder. Seriously, no joke.

14. why didn't you use fiberglass its indeed more stronger, mush easy to cast, cheaper…. 🙂 just a suggestion….

15. Completely bag your part, the only way you will pull the needed vacuum.

16. Your first coat in the mold is the carbon fiber then you can put just fiber glass after with tinted black resin. The back of the door can be made the same way. If your wrapping or painting the door just use fiberglass

17. The mold might still be usuable, just use a bigger plastic bag that can wrap around the entire mold or 2x the plastic bag you had and seal outside the mold. (Don't try to seal against the mold, seal the bag)

18. I hope you were using cheaper carbon fiber for the under layers and kept the show layer of carbon fiber a single layer? Also hope you were alternating the carbon fiber weave in your layers for added strength. Fantastic first semi second attempt. 😁

19. Cheap and free bracing for the fibreglass splashes (molds) you are making is the triangular cardboard packaging that comes with large fragile packages. Cut it to length and lay them in after the second layer of fibreglass cloth.

20. Crazy how people are working on making carbon fiber parts for super cars but can’t spend the time to learn the proper procedures on how to do it.

    The wax is to prevent mechanical locks, the vacuum is meant to prevent air bubbles. What you should have done after seeing the bubbles would have been to use a heat gun to get rid of them. Using an initial layer is also pointless.

Comments are closed.