In this episode we disassemble the rear upper and lower control arms, moving bushings and bearings as well as sliding around some camber bolts and camber plates to adjust our suspension components back to the correct placement.
http://bisforbuild.com/
http://bisforbuild.com/#shop
http://facebook.com/bisforbuild
http://instagram.com/bisforbuild
Music:
01:39 – Fareoh – Cloud Ten
06:28 – Alan Walker – Fade
11:19 – Alan Walker – Force
15:20 – Fareoh – Cloud Ten
Pull it back one inch
Cut the one off the lh thread and Tig weld the thread and your done
Fix the bolt cut it off at the nut and tig new bolt on get machine shop can fix or you can do it
there are 3 things you don't fuck with on a car… (cut corners). brakes , suspension and driveshafts. spend the money and do it right.
just so you and others know a lot of those parts are designed to bend or break so that the other more expensive parts are safe and there is a lot of things that can just be bent back instead of replaced your shooting for useable not show room specs
check with ambo 69 he could make u one check on utube
How do you know the rear suspension geometry is back in place down to the mm? Would be really cool te find out how this handles compared to a normal Evora??
What was preventing you from welding two bolt heads back to back
just found your channel and absolutely love it. this Evora playlist is by far my favorite! to bad I never seen this at the time you made it. I have a machine shop and could spit out that adjustment bolt in about 10 minutes! cheers buddy keep up the good work!
The "toe adjustment linkage" is called a turnbuckle 😛
i would guess that piece with the speaker and computer board is an alarm
Invest in some tools man!
I know you probably already have a ton of comments about this, but the threaded rod with left and right hand threads is commonly referred to as a turnbuckle as it adjusts the length of the linkage without completely disassembling it. This is necessary for steering linkage/alignment.
Here is an example of one: https://autoplicity.com/7396512-steinjager-j0028429-steinjager-jack-screw-turnbuckles-adjusters-m16-x-200-plated-zinc-yellow-109mm-long?1&gclid=CjwKEAiAq8bEBRDuuOuyspf5oyMSJAAcsEyWdlUkQQOSKDH_Y4-mYjUPXYni0aA0mp7ypPoC6Qrm0RoCH0_w_wcB
Camber-adjustment-bolt-retainment-plate or camberadjustmentboltretainmentplate … new word, lots of points in scrabble.
nuts and bolts are not the same! :<
Buy the toe link assy from Lotus. You don't want to cheap out for a critical suspension part. I'm very familiar with various alloys, machining processes and heat treats. You can make a part that looks identical, and is 1/10th the strength of the original. Safety first.
At 250k subs maybe get a hoist!!!
Torch + Aluminum? Sounds like a bad idea for the same reason you shouldn't powdercoat aluminum wheels. Not sure if there is a difference between cast and forged.
Sweet project. Subscribed.
Too much talking too little working
You don't need a new part from Lotus. It is called a Jack Screw
It's too late now, but what you need is a machinist friend with lathe knowledge. There;s a guy, Abom79, has a YouTube channel, he's an excellent machinist. He could've easily turned that threaded rod out in a matter of minutes. Maybe you should start a dialog with him for the future.
they probably won't just sell you the bolt because if you snapped the tie rod chances are there may be stress cracks on the tie rod ends. Don't really want to cheap out on something that holds your wheels in place. Regular All thread is most likely not the right grade and would snap in no time.
I dont know if you managed to get that tie rod adjuster shaft with the left and right hand threads, but if you bought a piece of decent quality hex bar and take it to a machine shop, it should take about 30mins to machine what you need. For the price you quoted for the original, you could probably have two made and have a spare for later.
How that helps
Did you say 3/4 cm? that is a first for me 🙂
The entire (ok probably half since it a wish bone) side force of the rear wheels is taken up by that tiny metal plate that is riveted to the subframe? Huh? How did the design thinking go there?
Im a late operator, if you sent me the dimensions and thread size I could make that little part in no time, I am a bit late to the party lol but I can help.
"It's not off by much." LOL 1/2 inch off wtf
Quick question can't tell from the video. Does the top two bolts that bolt the damper top mount plate to the frame on the shock towers have a nut on the top or is it a threaded welded to the body? I know it's only a 17ftlb on those bolts so maybe threaded nut on the body? curious to replace mine with rear clam on (shop manual notes it's possible).
Love the "I cant afford this car but I can fix a right off" approach. Hella cool
14:20 you sound like Rick from "Rick and Morty". Best adult cartoon if you've never seen it. Numb your brain and youtube a quality rip. Its so damn funny.
just a thought- your broken piece is just the opposite of a turnbuckle (male threads instead of female) if you can salvage enough of the reverse threaded rod off the original it just might be made to work. or try to find the correct reverse thread cutting die and fabricate( although a specialty die like this might cost more than a new part. oh, and one more thing, please use some kind of pointer when discussing specific pieces.   am having a good time learning about lotus construction-keep it up!
See, that's proper engineering there: That plate is sacrificial. A bucks worth of aluminium has saved tens of thousands worth of chassis damage – because Lotus know what they're doing and put the plate in there. Look at any built to cost sports car and that kind of damage would need a new sub frame. Really loving this series, looks like this car will be on the road sooner than you think!!
great as always.
When you need to nut give them a call
http://www.gcnbolt.com/wiki/GCN/HomePage
also Corpus Christi Nut & bolt. I use them for the hard to find stuff.
MCMASTER CARR!!!!
Never even think about welding a toe-link…!
Won't it be cheaper to machine out the broken rod out of some quality steel? A traditional machinist would fab it up in 1h of work…
could just be the arm that is bent ?
Why not just have the sway bar straightened at a machine shop ? Any HD press should be able to do it.
i would try northside imports, they might have it
hint, to obtain the rear toe link adjustment bolt contact a lotus dealer as they are likely to hold a old toe link lying around as apart of a service recall on the V6 Exige and Evora which could pinch?
rear tie link.
Take a left hand bolt and a right hand bolt in the correct size and thread and weld the heads together…
+B is for Build What Cameras do you use? I love your channel man. You're going to be HUGE!!!
B is for bolt even when its really a nut? you keep calling the nuts bolts!
As mentioned below take it to a machine shop they will match up the hex stock and can make you the entire piece for less than 50 dollars
Can't you just grind and weld that assembly back together? Best of all, it's free.
Hey Chris, Im from the UK, been a massive fan since < 8k subs. You might want to try partsgateway.co.uk in the UK, they have a list of all the UK salvage yards, and will find someone with the part for free!
Prob find everything you need on UK ebay. Most people ship worldwide.
http://www.ebay.co.uk/sch/Vehicle-Parts-Accessories/131090/i.html?_from=R40&LH_ItemCondition=4&_nkw=Lotus+Evora&rt=nc