We Build The Second Stick Shift Huracan In The World!!

1. I want them to put a speedometer and odometer if that's the name on the left and right of the dash

2. Guys those air filters will not work you have no idea how much silt there is at the mint. Please trust me.

3. When you doing the body work

4. Noticed your ‘involved’ with the build! Looked like 90% of the build was done by Oscar. What Oscar doing with the build?!?

5. At this point a R8 is more of a hurricane than this…

6. That overflow tank is for sure going to break off.

7. You should reinforce the frame behind the engine with an x shaped structure, otherwise its geometry will make it bend sideways if you bottom out or have severe lateral load.

8. Peace!

9. Is that 3D printed Dash UV resistant? It might deteriorate if left in the sun.

10. Absolute unit right there… oh and the car is pretty sweet too 😁
    Awesome work guys it’s really cool to have a YouTube here local to the pacific NW.

11. increase top layer count

12. A CB radio or Multiband/Multimission  for intelligent communication.

13. You need an emergency kill switch where you can cut all power. Got to be accessible when you are tightly secured in your seat.

14. UPDATE: It's not ACTUALLY a Huracan when it has GM drivetrain !!!!!!!!!!!!!!

15. It's amazing how far you come bro. Long time subscriber, have very limited car knowledge but enjoy every episode. 👏🏻

16. 🤙🤙🤙🤟🤟🤟🤘🤘🤘

17. Awesome build. Thb tho, disappointed u didn't retain more of the lambo dash elements

18. Stop teasing I can’t wait to see the jump Hurricane 🤙🏽🤙🏽

19. Another fricking amazing build and again Oscar is "The Man". Chris and Kyle you do fantastic work also. You 3 make one heck of a Team.

20. B is for Buildy… love it.

21. Clear Matte protectors for the screens and carbon fiber

22. The overflow tanks cap should be the highest point of your cooling system , it's supposed to fill under pressure not use gravity . Also makes it easier to bleed the system .

23. Are the hose clamps Alu or Steel? Just thinking about Bimetallic Corrosion

24. 3d printed rubber as in tpu? Interested to see how those work out. 3d printed bushings are something that I would love to figure out for my Subaru.

25. The frame isn’t going to be in the way on the axels for travel?

26. Enjoy housing the shaft Oscar 😂😂😂

27. Can’t wait to see it jump

28. Can’t wait for the next one

29. I'm writing this before watching what you did with the suspension. I would have just made rigid shafts with support bearings that mount to the frame and then a CV on either end or the shaft from there.

30. Super pumped to see this build get finished enough for its first test. Gonna be sick.

31. Chris this thing is another level. It’s so sick. Lambo if you see this you should sponsor these guys for the next off road monster.

32. Again, its going to be awd right? xD

33. Need a dust boot for the trans gear selector shaft

34. Have you considered flocking your driver focused 3D printed dash?

35. Hi man. So it'll be 3 weeks before I can get my truck tuned. Some reason my ecm is not reading my sensors…. All of them.🤦 in the meantime I found an oil leak in the back of the motor. No idea where from. Thinking valve cover or maybe valley cover. It's leaking on the top passenger side in the back of the motor. I can't pinpoint it. Anyway. I'll fix it eventually.

36. Good show!

37. Doesn’t the over flow have to be higher than the rad?? Other wise it will just act as a rad?

38. Make sure the 3d printed piece is made in PETG or ABS so it doesn't melt in the sun. PLA will warp in less than an hour inside the car in a really hot weather.

39. What a build for the past year but hey it's coming to together and was so worth the wait! I can till it's gonna look so awesome 😍 just hoping that mustang shaft weld is gonna hold….probs should get a pro to really make it solid….I feel that's gonna be the weak point…break for the event…

40. you did not make the first one, there's a guy from Russia who actually made the FIRST manual huracan like 5 or 6 years ago using an audi transmission

41. What’s the song at 6:50

42. Can you get touch screen compatible race gloves?

43. Great work guys. Can’t wait to see it roll!

44. to be safe id put a fan on the trans cooler just to be safe

Comments are closed.