1320Vette – Stock C6 Z06 Corvette Dyno

1. That’s not stock exhaust?

2. Pretty decent for an NA car…

3. c6 zs always dyno between 440-460 at wheels. this one was a low boy

4. Piece of SHIT TWO wheel drive Chivy. Smh

5. only 437?

6. since when are carbon ceramic rotors stock for a c6 z06?, maybe on the zr1

7. Wow, you were talking about this vette when you were also talking about your unicorn.

8. for a split second the car had 3800 hp!

9. looks like a Zo6 "carbon"

10. Maybe I should go with a Z06 over a Supra TT. Over 500hp out of the box and cost about the same as the Supra TT.

11. Lol ended up doing the ZR1 mod

12. Because it is crank horsepower that matters, not what you make on a chassis dyno. Change tire size or gears and the numbers change on a chassis, engine dyno's take out all of those variables and show how much power over time the engine really makes. Engine Dyno > Chassis Dyno.

13. Think for just a second guy. Nothing wrong with telling us what the motor puts out. Any car guy knows that you loose about 15% drivetrain loss with a manual transmission and you loose about 20-25 % drivetrain loss with a auto. Tuners arent going to pull your motor out just to see what a few simple mods do, It would cost more to do that than the mods. That why they test gains at the tires.

14. Then they should advertise hp at the tires since that is what matters. Why do they always tell us the crank hp if that doesnt count?

15. Your not a car guy this is a huge FAIL on your part. The Zo6 is rated at the crank at 505 HP but as you can clearly see in the video this rating is from the tire stupid, hence rwhp.

16. What was torque. 08 bolt on mine was 492(470

17. Manufacturers tell you the hp the engine has when they run it on an engine dyno that is hooked to the crank and or flywheel (which is basically the same place. AFTER you put it in the car it will lose some power by the time it gets to the road through the drive-train. This is why you put it on the dyno.

18. who heard it cross over into vtec when they changed camera angles?

19. Just know that manufacturers tell you the crank hp when they dyno their cars.

20. some years of zo5s have more torque management….especially the later models for some reason by GM

21. Don't forget this was on a mustang dyno.. which also tends to read lower then dynojets. Which on a dynojet it would have prob made closer to 460ish.

22. haha It made over 3000 hp haha

23. At the rear wheels mind you. The approximate 80 Hp loss is all heat or mechanical losses due to the drivetrain moving so many parts, including all of the linkage the tranny itself and the wheels. Also the exhaust system eats into the number. All saying aside, the Manufacturers aren't lying, they are just telling you your engine makes this much total power…if it wasnt moving anything at all or hooked to the car lol

24. true doesn't 505 HP sound so much better than 425-ish HP lol
    Yeah that bigger number is what all American car makers put and it is usually measured when the engine is on an engine dyno (not even hooked to a drivetrain or anything, with straight pipes mind you) so the numbers that American manufacturers usually post are crank horsepower. For good measure, always subtract about 80 HP to the total number and you will have a rough estimate on how much HP your car really has.

25. Yeah someone else said crank but another person said flywheel. Not sure which one is right. All I know is that I keep reading everywhere it has 505 hp. So im confused. But I guess 400 something is pretty good too. Maybe Chevy likes to lie about power to sell more cars. Oh well.

26. lol you realize the horsepower advertised by the dealers is to the crank right?

27. I have owned 6-c5 Zohs. They all ride better and quiter than any mustang I have ever owned.

28. Well…a shopping cart has a better ride than my cobra lol! But yeah I would expect a better ride from a newer car. I've heard the c5 zo6s are incredibly harsh and dd's.

29. Lpf= typo= of

30. Yeah depends on if you strap it down. There are different types lpf dyno as well. Depends on air temp etc etc etc. i found it very Interesting! Thanks!

31. It does have 505 hp, look it up jackass. It just shows less hp on the dynograph.

32. 144p ?

33. i love the plate number

34. TT it =D

35. I'm pretty sure Mustang dynos are known to read high not low.

36. corvette is not muscle its a sports car for the common man, come on the regular vette starts around 40k and that is pushing decent power already on a light body.

37. lets guess the Mods head's and cam right ?

38. you don't know shit about cars do you?

39. big ass rotors lol

40. I know you already got your response but to put it in more detail… The car does essentially make 505hp, at the flywheel. But, after it goes through the clutch, trans, driveshaft, rear end, axles, and through the tire to the ground is what a chassis dyno measures which gives a Wheel Horsepower Rating, or whp. 437whp is really good for a stock car.

41. few days ago ur comes up im my mind and i was thinkin ( aint he going to mod it yet?)

    man am so happy for u….all the best

    respect from the arabian gulf

42. Beautiful Vette. Def post more vids of this beast.

43. Drives and ride MUCH better than 03 04 cobra.

    soft clutch compared to cobra

    check my video of driving at atlanta motorsports park in the rain.

44. your comparing BRAKE horsepower to rear wheel horsepower.

    And Mustang Dynos usually show a lower value than dynojet

Comments are closed.