2001 Jeep Grand Cherokee Starter R&R – EricTheCarGuy

1. How are you

2. Hello

3. Great video to go off of but I can’t get the clip back in is there any tips on how to get it easier. I don’t have access like you do in the video from the top of the car. I just have to go off of a touch feel and I can’t get it.

4. Another good one thanks Eric 👍🏻

5. Eric thank you for helping out. This instructional video helped me out tremendously!

6. This engine is not Chrysler. It's still AMC. 2005 Grand Cherokee with the v6, that's Chrysler.

7. Helpful and likable video. Subbed and liked.

8. Is that clicking normal

9. Thanks Eric! 2000 GC 4.0L. My Duralst starter also had the solenoid plug on the opposite side. No problem. Had alot of trouble getting the red retainer clip out of the plug, and broke it. Still plugs on fine, and doesn't slip off. 1 hour flat, thanks to your video.

10. what was that support you removed for more access? i have starter out but cant remove bc no room between control arm and exhaust. Thank you Eric, a great mechanic and a great man as well

11. THANKS MAN I didnt know I had to pull the red tab back so I was stuck, I did it today and put the new one together

12. funny that jeep used 5 different sized screws

13. Thanks.. One suggestion. In begging, would be better to have a clear idea of symptoms and what car does and doesn't do when turning on, over.

14. Anyone know name of part unbolted at 5:25 that drops down? My jeep is missing that bolt and I can't find any info on it.

15. At 5:25 does anyone know what that bar is that comes swinging down?

16. Good job brother, thank you!!!!!

17. hey man, great video. can you tell me what the name of that support bar is? the one you had to remove, mine seems to be missing, but the bolt holes are there.

18. hey man, great video. can you tell me what the name of that support bar is? the one you had to remove, mine seems to be missing, but the bolt holes are there. and I seem to have some trans to engine play that may be damaging my flex plate. already replaced the mounts. thanks

19. hey man, great video. can you tell me what the name of that support bar is? the one you had to remove, mine seems to be missing, but the bolt holes are there. and I seem to have some trans to engine play that may be damaging my flex plate. already replaced the mounts. thanks

20. Thanks Eric, you took the fear away, smile. With today's cars, it's nice to have a real life idea as to what one is about to get himself into.

21. Thanks for the video! I am novice with car mechanics and your video
    helped me install my starter on my 2004 jeep GC. . I just discover it needs shims on this starter. I am not sure how to set the shims on the starter.

22. Nice instructional video.. I do have a Grand Cherokee 2011 4X4 Overland and I was wondering if the starter replacement it's the same as the one on the video??. i really want to change it myself and not get robbed by the mechanics.

23. Thanks for making this. Helped me replace it no problem. Took less than an hour and it starts right up.

24. This is so much easier when you have a lift. Jack stands aren't even tall enough to hold my WJ there haha

Comments are closed.