Learn how to put in sound deadening and heat reflective material into your car. In this case I was preventing a common wet carped problem due to condensation. The exhaust runs right under the floorboards and causes a lot of condensation and over time that causes the carpets to get damp.

Sound deadener insulation I used: https://amzn.to/37dJxPy

**If the video was helpful, remember to give it a “thumbs up” and consider subscribing. New videos every Thursday**

-Website: https://www.ChrisFixed.com
-Facebook: https://www.facebook.com/chrisfix8
-Twitter: https://twitter.com/ChrisFixed
-Instagram: https://instagram.com/chrisfixit
-Subscribe Here: http://www.youtube.com/subscription_center?add_user=paintballoo7
-YouTube Channel: https://www.youtube.com/ChrisFix

Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

source

By carmodpros

ANGELHOUSE | 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (CARMODPROS,COM)

23 thoughts on “Applying thermo-acoustic insulation in your car (DEI Floor & Tunnel Shield II)”
  1. there are other and much cheaper options, emergency weather proofing tape or house hole underlayment like the EVA with the foil lining works in a similar manner.

  2. Did you check your ac condensation drain line? when it gets clogged, happens regardless with time, it will start leaking into the cab and the spot you're working on is the first spot that gets wet…

  3. I love ChrisFix' videos, and untill now I have never seen a video that i disagree with. While the installation tutorial is helpfull indeed, I think the explanation of what causes the carpets to be wet is wrong. What is explained at the 1 minute mark contradicts all my knowledge of condensation, heat, and vapor. Condensation is caused by hot air containing a lot of moisture meets a cold surface, like a cold beer. The cold surface cools the air, resulting in the air being less able to hold water, and thus leaving the water on the cold surface. A CAT that heats up the floorboard would contribute to heating the water making it evaporate, and heating the air allowing it to hold more water. Putting insulation in the floorboard would be counter productive to achieving a dry carpet in any instance. Sorry for bad english.

  4. Unless I misunderstood the video, there is no way this was condensation. Condensation occurs when warmer moist air meets a surface that is below its dew point. Heating the surface with the exhaust would reduce the chance of condensation. If this fixed your issue then you may have sealed up a leak point inadvertently. This is simply not how condensation works. If you have a leak, you had better be sure that you have not trapped water underneath, then you will have a real issue.

  5. i know that this is out of topic, but were you mad in all the videos you've made when saying "Hey guys" with that low tone? 😀

  6. Yo man I thought this was a new video (popped up in my feed) and it sounded like you were straight up depressed or not feeling it. Turns out it is just an old video lol. Definitely much more enthusiasm in the newer videos!

Comments are closed.