Mike and Pat install reengineered drive train in ’33 Factory Five Racing hot rod kit and test it for Dupli-Color sweepstakes
PARTS USED IN THIS EPISODE:
ARP: Engine and Accessory Fasteners, Stainless Steel, 12-Point, Ford, Small Block, Kit
More Info: https://pntv.us/pn_pt_1899
B&M Racing: Torque Converter, Nitrous Holeshot, 3,000 rpm Stall, Ford, AOD, Each
More Info: https://pntv.us/pn_pt_1902
Comp Cams: Pushrod, Hi-Tech, Chromoly, Heat-Treated, 5/16 in. Diameter, 6.600 in. Length, Universal, Each
More Info: https://pntv.us/pn_pt_1900
Crane Cams: Camshaft, Hydraulic Roller Tappet, Advertised Duration 276/282, Lift .513/.529, Ford, Small Block, Each
More Info: https://pntv.us/pn_pt_1893
Crane Cams: Rocker Arm Conversion Kit, Guideplate, 3/8-24 in. Stud, Pedestal to Adjustable Rocker Arm, Dodge/Ford, V8, Kit
More Info: https://pntv.us/pn_pt_1891
Crane Cams: Rocker Arms, Stud Mount, Full Roller, Aluminum, 1.6 Ratio, Fits 3/8 in. Stud, AMC/Chevy/Ford, Set of 16
More Info: https://pntv.us/pn_pt_1892
Dupli-Color: VHT, High Temperature Wrinkle Finish; Blue; 11 oz. Aerosol
More Info: https://pntv.us/pn_pt_1913
Dupli-Color: Paint, Paint Shop Finish, Lacquer, Gloss, Midnite Blue, 1 qt., Each
More Info: https://pntv.us/pn_pt_1915
Dupli-Color: VHT, Paint, NU-Cast, High-Temperature, Enamel, Satin, Iron, 11 oz., Aerosol Spray Can, Each
More Info: https://pntv.us/pn_pt_1912
Dupli-Color: Paint, Flameproof Coating, High-Temperature, Satin, Clear, 11 oz., Aerosol Spray Can, Each
More Info: https://pntv.us/pn_pt_1914
Dupli-Color: Paint, Metallic Coating, Enamel, Textured, Silver Metallic, 11 oz., Aerosol, Each
More Info: https://pntv.us/pn_pt_1884
Dupli-Color: Paint, Engine, Enamel with Ceramic Resin, Flat Gray Primer, 12 oz., Aerosol, Each
More Info: https://pntv.us/pn_pt_1883
E3 Spark Plugs: E3 Spark Plugs E42, Tapered Seat, 14mm Thread, .440 in. Reach, Projected Tip, Resistor
More Info: https://pntv.us/pn_pt_1911
Evans Cooling: Evans, High Performance, Waterless Engine Coolant, For modern, classic, vintage, light duty diesel and CNG
More Info: https://pntv.us/pn_pt_1886
Ford Performance Parts: Oil Pump, High-Volume, Ford, 221/255/260/289/302, Each
More Info: https://pntv.us/pn_pt_1897
Ford Performance Parts: Pulley Kit, V-Belt, 1-Groove, Standard Ratio, Aluminum, Ford, Kit
More Info: https://pntv.us/pn_pt_1898
Pertronix: Distributor, Plug and Play, Hall Effect Pickup, Vacuum Advance, Black Cap, Ford, Small Block, Each
More Info: https://pntv.us/pn_pt_1908
Pertronix: Ignition Coil, Flame-Thrower III, Canister, Round, Oil Filled, Black, 45,000 V, Ultra Low 0.32 ohms, Each
More Info: https://pntv.us/pn_pt_1909
Pertronix: Spark Plug Wires, Flame-Thrower, Spiral Core, 7mm, Black, 90 Degree Boots, Universal, V8, Set
More Info: https://pntv.us/pn_pt_1910
Summit Racing: Harmonic Balancer, OEM, Internal, External Balance, Nodular Iron, Natural, Ford, 5.0L, Set
More Info: https://pntv.us/pn_pt_1901
Summit Racing: Summit Racing Intake Manifold, Carburetor, and Air Cleaner Pro Pack: Combo, Edelbrock, Dual Quad, Intake Manifold, Natural, Carburetors, 500 CFM, gaskets, studs, linkage, Fuel line assembly, Ford, Small Block, Kit
More Info: https://pntv.us/pn_pt_1894
Summit Racing: Cal Custom, Oil Pan, Cast Aluminum, Finned, Polished, 5-Quart, Ford, 260/289/302, Front Sump, Each
More Info: https://pntv.us/pn_pt_1896
Summit Racing: PIT PAL,Engine Lifting Sling, 22 in. Long Straps, Steel/Nylon, Each
More Info: https://pntv.us/pn_pt_1887
Summit Racing: Cal Custom, Valve Covers, Aluminum, Polished, Stock Height, Finned, Ford, 289/302/351W, Carbureted, Pair
More Info: https://pntv.us/pn_pt_1895
Tuff Stuff Performance: Alternator, Internal Regulator, 100 Amp, One Wire, V-Belt Pulley, Chrome, Ford, L4/L6/V6/V8, Each
More Info: https://pntv.us/pn_pt_1907
AutoZone: Airtex Fuel Pump
AutoZone: AutoZone Synthetic engine oil SAE 10W-30 1 qt
AutoZone: Duralast Gold Starter
AutoZone: ProPower_AGM / Battery
Factory Five Racing,Inc.: The Factory Five “33 Hot Rod comes with all of the parts you need to build your car except for the engine, transmission, rear-end and paint. Complete kit, with optional 18″ and 20” Salt Flat Wheels – Gray, with 245/40/R18 and 295/30/20 TOYO Tires
PowerTrain Products: Ford 302 5.0 V8 engine,94-96,ho,roller
PowerTrain Products: Ford Mustang Axle, 94-04, 8.8, 3.73, Yukon Duragrip Positraction
PowerTrain Products: Ford, Transmission, Automatic Overdrive, non-electronic, AOD
The Industrial Depot: Fasteners, Hardware, And Shop Supplies
We'll continue to post these episodes here on YouTube. If you can't wait for the rest of the build, visit our site to binge-watch: https://www.powernationtv.com/shows/engine-power
yes, it's all nice, the car is beautiful, but when we ask what the price is…then you hide it like a snake's legs…shame…put the price in the video…😡😡😡😡
To bad Crane Cams ain't around anymore.
Cool car ! The only difference is I’d put a Chevy engine in it . Though I get it if you’re a Ford guy to put a Ford motor in it . If there is a similar style Chevy body available I would use that as well.
Beautiful. A very well made video
🥝🇳🇿😊
I could build this in my garage…yeah right!
Fascinating video.
Does this kit come with a RHD option? Are there any wheel flares or mud Guards that can be fitted? The wheels MUST have some cover on them here, to protect pedestrians. That is, the tyres can not protrude out beyond the body of the car.
I am in Oceania – that's Australia and New Zealand, plus some of the Pacific. Getting a newly-built car registered here means it has to meet new car registration legislation. That also includes mufflers for noise reduction and pollutant suppression.
Having ABS, ESC and a couple of Airbags hooked up is also required.
I dont recall you covering that in this video?
Finally, is there any crash test analysis data available for any of these car kits?
Can you register this in CA????
Dude should have his ass kicked for tightening rhe oil filter like that!!!
Boomer, move to use a carbureted Ford when you can use a LS3 and twin turbo charge that b!tch and yeeha.
Классную машинку построили. молодцы. интересно у Вас
Literally my dream to have one! Lol one day
What kind of money does it cost to build a complete car that you have so I have an idea if I want to do it
The welding on this chassis looks bad .
Very Good!… 396 🐄🦉🏴☠✝
Couple of things wrong! I am 2 years late and I live in the UK.
This is a beautiful car. But I want to know why they didn't put a spacer plate between the engine and the transmission? The people on this show must not know much about a ford engine. Other than that it's a cool ride.
18 03 что туд делает Мурад? Он им ахуено сделал.
Hit it!
I watch this whole video just to have some d-nozzle play music over the engine sound?
Probably spent just as much in spray paint as it would of cost to have in professionally done lol
It is lacking chrome elements.