The Datsun’s MAJOR problem I’ve been hiding…

1. Make sure there is nothing inside the house as well. Had a car that kept overheating after an engine was swapped. Chased it for a while and when I removed the lower rad hose there was a plug for the inlet of the motor. It was put on by the place that sold the motor to protect it and never removed when it was swapped. It was causing similar issues.

2. Adam say :This car is fast

3. The radiator is too big

4. Too much oil in the fuel does not help either…

5. Bro you have nothing to explain to us. It wasn't that big of a deal. If you don't know something then you don't know. That's how you learn by making mistakes. If people can't understand that then that is their fault. You don't have to explain yourself to anyone. Keep doing you and learn the best way you know how.

6. IM CRYING AT THE VOICE OVER

7. Needle bearings also are the first to go because of constant high rpm shifts … happens in rx8 tranys too

8. that's why some hoses come with springs in them, so thje3y don't suck shut.

9. Put baffles or flaps on your shroud so air can pass through your radiator while driving.

10. I'm lucky to have a dad that knows a bunch about cars and has always helped me learn. If I had never had someone show me how to pull a 9 inch, and the videos I could find were 8.8s, I would be very confused as well. That's why you make the big bucks. I would never post a video of me learning shit and messing up on the way. But that's why most of us started watching this channel. Watching someone learn from the ground up is the content people want.

11. Dawn soap will kill the mold

12. Loving this!!! Working on engines, before the days of computers, was all the 6 senses— 6th was that gut feeling about the other 5 being wrong.
    Todays tech is amazing! 🙂🙏

13. The coolant pipe gets rock hard because coolant pipes build pressure. When the coolant gets hot it expands. My Volvo 240 and my Civic do the same thing and they aren't modified.

14. 1960s something Datsun 1200 4 door I took my drivers test with, super small and awesome.

15. You should get some cars just like Nicole’s lol

16. you need Ammo NYC bruh

17. Thermostat out

18. The black knob feels great in my hand

19. Add a spring inside of the lower hose to keep it from collapsing like older domestic brands do and definitely add more timing back at idle and tone down the IACV in the tune (or replace it if it’s not responding) I’m not a rotary guy but just about every piston engine likes 12°+ at idle

20. Take a glove and zip tie it to the radiator fill. Then start if it blows up like a balloon you know it’s pushing combustion

21. I also had a honda that would suck the hose shut. Replace it.

22. Adam's voiceover for Collete… LMAO

23. I think the car just doesn’t have enough cooling system. It stays cool while it’s moving cuz it has air moving over the radiator but when it’s not moving the small radiator and the single fan isn’t enough to keep it cool. Just my guess anyway…

24. I had the same issues with my gen2 Mr2, replaced the radiator and it was good to go

25. Drive with the heat on. Its always worked for me with hoopties. Or move the turbo up.

26. No thermostat will do it. It's not having enough time to let it cool. It's constantly heating the water. I bet money if you put a thermostat in it now that you have a good fan it will be ok

27. That cooling problem could be a Chinese intercooler, had that problem once

Comments are closed.