Revealing our Best Builds Yet + Designing an Angle Kit!

1. I haven't done much r but I'm going to do lots of…. Nope 🤦‍♂️🤦‍♂️ everything after that was just comedy gold!!

2. Get yourself an einstar or peel 2 3D scanner, bamboo labs X1 Carbon 3D printer and you can prototype most things you might need. No need for a super fancy scanner when FDM 3D printing isn't too accurate.

3. Hey @AdamLZ I like the idea of the macheaned tie rod and i think it could work, so seeing as the supra is a freak child that Toyota and BMW created, and that most of the steering components are BMW factory parts there might be a way to reprogram the steering rack to allow itself not to lock up when you have the machined tie rod installed. Im a Bmw tec and when installing new steering racks into coustimers vehicles you tend to have to do a survice funtion/ adaptation with a diagnostic tool that carries the Bmw software. One of these adaptation tests is to calibrate the end to end lock on the rack. Now im not saying its a 100% doable thing but you could try doing a recalibration on the steering rack and see if it would bypass the binding that you get when the ignition is on. (I hope this might help you achieve your extra angle)! From Tony, viewing from the Caribbean👍

4. Can you not fit your milled tie rod and then recalibrate the steering angle sensor? it should allow it too freely turn until its max as it has the factory settings in its memory.

5. Can you enter from Canada for the give away???

6. Can you like make a drag car? Everything you have is either grip or drift don’t get me wrong. I love them both, but it would just add so much more to your contact.

7. Na bro I love the R and the D, and Adam's the guy for the D lmfao

8. whenever you start to play with htg be carefull with it,people tested this unit in eu and after doing tests with the car after tune it randomly putted reverse gear and snapped everything in the drivetrain:')
   there is if i remember correctly some more issues people had with it so seems like pretty garbage start for automatic transmission tune/unit

9. 3d printers are 100$ lmao why don't you have one I have 50 and I have 1% of the funds

10. S13 should just be a compound missile for everyone visiting

11. Did that lathe come with a 4 jaw chuck???

12. Why when you’ve spent god knows how much on an A90 supra would cheap out on parts cobbled together by this clown 😂

13. https://youtu.be/vjzY0V4CV4E

14. Your a legend bud

15. we miss butters man

16. Once again providing the best video!

17. R&D tshirts coming soon

18. Totally didn’t just spend $120 on some shirts and stickers 😂

19. Did anyone ever win the Nsx?

20. Those squeals aren't terrible, but without coolant you need to be careful. if you had a way to use coolant on your parts, you could machine much more in a single pass.

21. Just saying when a steering rack maxes out like that it's ah how 🤔 u say no good

22. Uhh did I miss the gt3 lap time?!?!

23. Double it and give it to the next person

24. This is a awesome giveaway get on it

25. How to order? Is there any chance to order i'm from the Philippines?😂

26. This is my dream car…. Please let me win haha

27. That's a steering stop teach in process you can do with a dealer scan tool. At least on mercedes it's like that

28. “Stop that bit”

    “Off rip”

    Definitely a certified Florida man now

29. I've worked for JTEKT which is a steering rack company: inside MCU software there usually is a "virtual rack end" line in order to stop the tie road from hitting too hard the housing and prevent destroying everything or have a jump between pinion and rack

30. possibly servo telling the computer it's too far

31. You might have put enough R into this that the D will come easy for someone else.

32. Be careful on the lathe man, watching one video is NOT enough training 🤣 buy yourself a self centering chuck, and some nice tooling. Learn your feeds and speeds for different materials. It's a potent machine when used to it's full potential, but also something to respect, one wrong move and that's it.

33. Never give away the white chaser 😞

34. hobopiss13 made it back to Florida 🎉

35. Usually this problem were the car limits the lock when it's turned on can be solved easily by doing a recalibration on the electronic power steering module, I do think you will need a specialized scanner for this… but you won't need to change any sensors or bypass any modules to be able to make the system understand that the rack has a bit more angle

36. I want that s13

37. 8:45 bro I thought someone was ringing my doorbell wtf Mike 😂

38. Oh man, thought that CHASER was coming home with me at the end of the Giveaway. 😲 But, im still gettin in on this one

39. loving your d adam

40. I don’t think you would need to abandon the rack spacer idea. I can guarantee that you could reprogram whatever controls that rack to allow it to have more movement

41. Tool was sticking out too far on the lathe

42. For a second the hoodie looked like it said high hop slow cars

43. currently in the middle of building my VVT engine! all your videos have been so much help!! got a lot of similar parts as your last build. but got the Mazworx Main Caps right away. watching your vid definitely made me order those right away😂 love the content man!! happy to see it back!

44. The junk s13 in florida wwww 🔥🔥🔥🔥🔥

45. Wait, who won the NSX?

46. The faster jdm made in Japan drift race Japanese lady Toyota supra say🇯🇵🎎🗾🇯🇵🎎🗾🇯🇵🎎🗾🇯🇵🎎🗾🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

47. If you’ve done little to no R, you’re not going to know what you’re doing when you put the D in. 😜😂

Comments are closed.