Thank you for watching this live show. Sorry if I messed up some of your names. I had a really hard time during this one for some reason. Here is what I hope will be useful info for you.

If I didn’t get to your question I apologize. The next show is scheduled for March 1, 2017 at 7pm EST.

This is where I took the questions from for this show: https://www.ericthecarguy.com/kunena/etcg-answers-questions-live/67438-etcg-answers-questions-live-82-ama-2-15-2017?limitstart=0

The best place for answers to your automotive questions: http://www.ericthecarguy.com

EricTheCarGuy FAQ: https://www.ericthecarguy.com/faq

The latest on the Fairmont, Fixing it Forward, and all things EricTheCarGuy: https://www.ericthecarguy.com/blog

Thanks for watching!

Links

BleepnJeep: https://www.youtube.com/user/bleepinjeep

ScannerDanner: https://www.youtube.com/user/ScannerDanner

Graveyard Carz (Mopar Stuff): http://www.graveyardcarz.com

Rosedale Technical Institute (Where ETCG Went to School): http://rosedaletech.org

The ETCG Story: https://www.ericthecarguy.com/about-etcg

Videos Mentioned

When it’s Time To Say Goodbye: https://www.youtube.com/watch?v=eZvw8ibuWo8

Modified Cars, a Technicians Point of View: https://www.youtube.com/watch?v=ECjMbkRjVzE

Technician Sanctioned Modifications and a Little Rant: https://www.youtube.com/watch?v=GpN4EO8RihY

Honda J Series Timing Belt Replacement VManual: https://www.ericthecarguy.com/honda-j-series-timing-belt-replacement-vmanual

Toyota Steering Problems: https://www.youtube.com/watch?v=bqPF_SNueyg

Solving Performance Problems 1: http://www.youtube.com/watch?v=rsGTeWayqIU

Solving Performance Problems 2: http://www.youtube.com/watch?v=sAKwCzUE_9M

Re Performance Problems: http://www.youtube.com/watch?v=_vAJi5rLMGY

Used car inspection

Carburetor Rebuild Basics (Part 1): https://www.youtube.com/watch?v=85nszLpbbXY&t=3s

Carburetor Rebuild Basics (Part 2): https://www.youtube.com/watch?v=dprLQcQrAqE

Carburetor Adjustment Basics: https://www.youtube.com/watch?v=oRrJQRtBNck

Ford 8.8 Rebuild (Part 1): https://www.youtube.com/watch?v=5fARhE7v5Bg

Ford 8.8 Rebuild (Part 2): https://www.youtube.com/watch?v=npUBF9Wj1Iw&t=1718s

ETCG Meet Up 2015: https://www.youtube.com/watch?v=1eyUUNI9RQw

Choosing an Automotive School: https://www.youtube.com/watch?v=B1E-l9VZl7s

Do You Need an Automotive Education?: https://www.youtube.com/watch?v=x9oFqDoV22Q

Useful articles.

Engine overheat: http://www.ericthecarguy.com/faq/what-to-do-when-your-engine-overheats

No start problems: http://www.ericthecarguy.com/faq/solving-automotive-no-start-problems

Idle issues: http://www.ericthecarguy.com/faq/solving-automotive-idle-problems

Performance issues: http://www.ericthecarguy.com/faq/solving-automotive-performance-issues

Diagnosing Noises: http://www.ericthecarguy.com/faq/diagnosing-noises-in-your-car

Diagnosing Vibrations: http://www.ericthecarguy.com/faq/determining-the-causes-of-vehicle-vibrations

Electrical Problems: http://www.ericthecarguy.com/faq/solving-automotive-electrical-problems

Brake Issues: http://www.ericthecarguy.com/faq/solving-brake-problems

Transmission issues: http://www.ericthecarguy.com/faq/solving-transmission-problems

HVAC problems: http://www.ericthecarguy.com/faq/solving-automotive-hvac-problems

Buying a Used Car: http://www.ericthecarguy.com/faq/what-to-look-for-in-a-used-car-purchase

Leaks: http://www.ericthecarguy.com/faq/finding-and-fixing-leaks

MPG: http://ericthecarguy.com/faq/finding-and-fixing-the-causes-of-poor-mpg

Social Network Links

Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts

Twitter: https://twitter.com/EricTheCarGuy

Google+: https://plus.google.com/100195180196698058780/posts

Instagram: http://instagram.com/ericthecarguy

Stay Dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

source

By carmodpros

ANGELHOUSE | 2009 - 2022 | HOSTING BY PHILLYFINEST369 SERVER STATS| THE IDIOTS ROBOT AND CONTROL INC. |(RSS FEED MODULE)| ALL YOUTUBE VIDEOS IS A REGISTERED TRADEMARK OF GOOGLE INC. THE YOUTUBE CHANNELS AND BLOG FEEDS IS MANAGED BY THERE RIGHTFUL OWNERS (CARMODPROS,COM)

25 thoughts on “ETCG Answers Questions Live #82 (AMA) 2/15/2017”
  1. Hi  Eric  I  have  just  install  a  new  AC  compressor  on  my  Dodge  Nitro.  What  should  the  readings  be  on  my  instant  read  thrrmometer

  2. Even working on old cadilacs are terrible, took me 8 hours to do a starter on a 91 Deville "regular" 5.0 Cadilac engine before the northstar.

  3. hello sir
    my sx4 having a heating problem whenever run in heavy traffic
    When my car heating i always noticed that the radiator upper pipe is very hot and the lower pipe is very cold
    till yet I had replaced new radiator new coolant pipes thermostat valve thermostat switch but the problem is still there
    heating valve dose not work properly
    sometime cooling system work correctly and some time heat and valve not work
    what to do please help me

  4. Aha, Eric. I get a laugh when you talk about doing things that you're not supposed to do, because they work.

    This would never fly in my field.. (I fix Airplanes)

    But I totaly get it how automotive is a completely different field, you can get away with so many more short cuts, that I would never be able to think about.

    I forgive you 🙂
    Stay dirty!

  5. ENTREI LA NO CANAL RONNTEC PARCEIRO MEU SE VOCÊ É PARCEIRO DELE EU VOU SE O SEU VOU INSCREVER NO SEU CANAL

  6. hey Eric. I'm having a hard time locating a ecu for a 2000 suzuki grand vitara 1.6 manual coup. can you assist or point me in the right direction?

  7. EricTheCarGuy hi Eric i searched online n no real answer. i have a 93 dx 5spd hatch civic d15b7 p06 ecu only revs to 5500k rpm no cel passed smog first try in CA. runs perfect really strong to 120mph. i also have a 92 dx auto hatch revs to 6500 rpm. thanks love your videos

  8. thoughts go out to Brian! also is it just me..or do the fairmont front wheels look more central? great video as always Eric:)

  9. I have a 2000 bonneville that misfires like heck when you leave park. It has a bad coil pack I'm replacing (confirmed by moving it down and switching it to a different bank of cylinders and it caused those to misfire instead.) however I'm thinking this won't fix the misfire because the intake gasket is leaking a little. No oil and coolant mixing. But air leak and external oil leak around the gasket tells me it's bad. At 247k what else should I look into checking on the engine.

  10. Almost all technology featured in most vehicles has been designed by Mazda. It's the main reason they never put their hand out during the big auto bailout.

  11. Eric I have a great video…water pump/timing belt/fan bracket/valve guides/ vvti cam seals on a 98' LS400…and you can use my car as a model ::: )))

Comments are closed.