Here is the full version of #DarkMatterPikachu on the dyno. If you want to skip to the good part, here’s the video.
Special thanks to UNOH: http://www.unoh.edu
Also thanks to Kevin Frische and Nate Mailhot.
As you can see, things didn’t quite go as planned. It seems to be the way with this engine. It fought us at every turn it seems. However, at the end of the day, this is one heck of an engine. Had we had the entire day to play with the tuning, I’m sure we could have gotten even better numbers.
No worries because once I finish the car I plan to go back and put it on their chassis dyno to see what kind of power it makes at the wheels. We should have plenty of time to dial in the max power of this set up.
So kick back and watch us struggle as we try to make this engine produce some power on the dyno.
The final #’s: 574.7hp @5500 622.8lbft @4400 7.8psi boost
Check out Kalvinator Engines: http://www.kalvinatorengines.com
Previous video in the series: https://www.youtube.com/watch?v=n_9rUXYxAY0
The #FairmontProject playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Thanks for watching!
Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/66641-darkmatterpikachu-dyno-testing-day-full-video
Dyno Info: http://www.superflow.com/aspx/cat.aspx?catid=2&navid=7&gclid=CNGWsYXtxNACFYU2gQodHoULFQ
Ford 302 Firing Order: http://www.gtsparkplugs.com/firing-order-ford-260-289-302.html
Ford HO 302 Firing order: http://www.gtsparkplugs.com/firing-order-ford-302-351.html
Do NOT buy this Carburetor hat: http://www.jegs.com/i/Turbonetics/880/10351/10002/-1
Buy this carburetor hat: http://www.superiorairflow.com
Engine Details
Displacement: 363cid
The Block: http://www.pbm-erson.com/Catalog/PBM/Block%20Kits/KITSBK-29
The Crank: http://www.pbm-erson.com/Catalog/PBM/Clearance/PBM85207
The Heads: https://performanceparts.ford.com/part/M-6049-X302
Compression: 8.9:1
The Cam: Comp Cams custom grind: 222@.050″ 222@.050 .357″lobe lift .571″ valve lift (1.6 rocker) .351″ lobe lift .562″ valve lift (1.6 rocker) 114º separation 4ºadvance
Modified: Edelbrock Performer RPM intake
The Carburetor: https://www.holley.com/products/fuel_systems/carburetors/demon/mighty_demon/parts/5402020BT
The Distributor: https://www.msdperformance.com/products/distributors/ford/parts/8582
The Ignition: https://www.msdperformance.com/products/ignitions/street_and_strip/parts/6462
The turbo Kit: http://www.on3performance.com/shop/1987-93-mustang-gtcobra-5-0-foxbody-turbo-system/
**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Google+: https://plus.google.com/100195180196698058780/posts
Instagram: http://instagram.com/ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Can u tell parts used
This made me as anxious as if it was my own motor lol!
"1 horse power Bob"
I'm not a turbo guy but iv always wondered about how those top hats affect the carb.dont think carbs are designed for boosting.Blowers much different,fuel in then boost
I’ve been at UNOH for a while and didn’t know you ever went there
41:05 hose falls off, 42:12 he noticed.
Serious queatuoon. How pleased are u with the laser temp gun? Accurate?
Another thing a dyno shop will do you make it look like they just built you the biggest baddest engine is to increase atmospheric pressure and sea level conditions. by not installing those proper numbers that also gives huge gains on dyno numbers. I also had my 363 dyno on the exact machine from two different shops local to me and because the first guy used Colorado type atmosphere my engine was showing 65hp more than true numbers. Which was literally a 10% gain like your guy is telling you.
Why did the engine take several seconds to rev up after the control stick was pushed all the way forward? It appeared that it was stalling and after a few seconds it would start to go to gain higher rpms.
Username: student
password: Student
I had same problem with my chevy 383 with a demon 750cfm double pumper very difficult to make it work right so I just replaced it with an edelbrock 750cfm man it fixed the problem and ran fabulous
This is so neat watching the process
Good call on lunch. Problem solving on an empty stomach is never good.
The skinny guy kind is like a different version of Mike Finnegan. I feel a lot better after watching this video, I have run into some problems with my engine and I will get it figured out by trying and error, just like they did. The only difference is that I am kind if clueless. Great video.
Firing order is determined by the cam I know you know that Eric just saying lol
I'm surprised he didn't grenade it
Idk Eric I think I would of stopped this guy because he doesn't seem to know what's going on
What is Jordan Shlanzky doing at UNOH? 🤣😂
I enjoyed the video thank you very much for showing the whole thing it was nice to see how you we're troubleshooting the engine trying to dial it in thanks again
Real world problems, real world solutions, not the sugar coated, everything goes right the first time bs seen on the tele.