Check out Kalvinator Engines: http://www.kalvinatorengines.com
Properly assembling your pistons before installation is critical to the life of your engine. If you don’t get it right, the results can be catastrophic.
Kevin Frische has been doing this work a long time. In fact, he taught performance engine building at UNOH for several years. In this video, Kevin shows us how he assembles pistons in a performance application like #DarkMatterPikachu.
If you’d like to know more about how to properly gap piston rings, check out this video: https://www.youtube.com/watch?v=uAguO3EPzcI
My pistons and rotating assembly: http://www.pbm-erson.com/Catalog/PBM/Rotating%20Assemblies/PBM%20Forged%20Rotating%20Assemblies/KIT34754FHS
Thanks to Kevin Frische for his help in this video.
Previous video in the series: https://www.youtube.com/watch?v=uAguO3EPzcI
The #FairmontProject playlist: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Camera: Brian Kast
Thanks for watching!
Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/66487-how-to-assemble-pistons-rings
Engine Details
Displacement: 363cid
The Block: http://www.pbm-erson.com/Catalog/PBM/Block%20Kits/KITSBK-29
The Crank: http://www.pbm-erson.com/Catalog/PBM/Clearance/PBM85207
The Heads: https://performanceparts.ford.com/part/M-6049-X302
Compression: 8.9:1
The Cam: Comp Cams custom grind: 222@.050″ 222@.050 .357″lobe lift .571″ valve lift (1.6 rocker) .351″ lobe lift .562″ valve lift (1.6 rocker) 114º separation 4ºadvance
Modified: Edelbrock Performer RPM intake
The Carburetor: https://www.holley.com/products/fuel_systems/carburetors/demon/mighty_demon/parts/5402020BT
The Distributor: https://www.msdperformance.com/products/distributors/ford/parts/8582
The Ignition: https://www.msdperformance.com/products/ignitions/street_and_strip/parts/6462
The turbo Kit: http://www.on3performance.com/shop/1987-93-mustang-gtcobra-5-0-foxbody-turbo-system/
Related Videos
The #FairmontProject series: https://www.youtube.com/watch?v=L22GsHQi7tU&list=PLSzhQ6St-ov2nxWVKCeU14Vt7JJ_QSZvs
#DarkMatterPikachu on the Dyno: https://www.youtube.com/watch?v=UADOHm6-BJc
Engine Balancing Video: https://www.youtube.com/watch?v=XjuGkXpha8Q
**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Google+: https://plus.google.com/100195180196698058780/posts
Instagram: http://instagram.com/ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
The masters.
Greetings and thanks for the video.
But now then, I thought whatever crank you guys discussed would come with the recommended thickness bearings or atleast information warning to avoid such an issue in advance, no?
I commented the same thing about ring pliers on another video, by another channel, the guy claims that you damage the rings like that…The builder I worked for, was 70 years old, had 50 years of experience, and Built Race engines that won NASCAR/NHRA/IHRA Events and Championships and he never used the ring pliers… (I have seen rings BENT with pliers – And Broken, and they were not over extended!)
Hello can you show me how is infiniti fx45
Ima be changing the pistons and piston rings on a 2004 1.8 vw Jetta soon, I was watching a video on it and it said that I can do it by just taking off the head, dropping the oil pan and pushing the old pistons out thru the top, would this really work?
Thank you!!! Very helpful…will apply this also in my channel to guide others!
Real amzing knowledge you have and ready to share with us.
Is it necessary to put the right face of the piston ring, did it have the right side, like the one with letter need to be facing upward or else? Or any side is the same?
sorry I wasn't a engineer I love ingines really bad
ez
Eric
What’s the best aftermarket brand for piston rings ? I’m rebuilding my 04 civic engine and the OEM are like $200 for 4 pistons rings
sir rig direction will be same for any engine type
One of my rings has a "N" marked on one side of the ring. Does this "N" meen "this side up"?
very good
6:17 you can seer the scratch left by the end of the ring
I do it too on old pistons.
Dude your the GO TO GUY FOR ME when i wanna know something. So much detail and THANK YOU
Some good ideas for the rings on a piston assault rifle or machine gun in this video.
Wish you can do a v6 3.5 piston rings Honda very problematic engine
Anyone have trouble when getting pistons and ring sets half the rings are to small the ring gap is way over book sectsaphations , say you just had a bore 10 over 3.508.5 piston is 3.505 , ring gap should be 16th 22th . But your gap is at .034 on half the rings and rings with a gap of 19th you stick in the bore that had 34 the gap is back to 19th so you know it is the rings not the bore . I have and sent back 2 sets so far never cut the ring gap . if I had keep both sets I could have finished the job . I told the seller ship me .020 over rings and I will trim them myself the 20 over are .518 he is telling me they will not work . im sick of having a huge fight over the rings . I think someone stuck Stock rings in the 10 over bin to be a A$$ stock bore is 3,494 .
Enjoyed that.heaven knows why its got 60 dislikes…..
Very nice video Dost my my YouTube channel Subscribe my all friends please aapka ðŸÂÂÂÂ︠motorcycle mechanic technical channel Jay Ho 👩â€ÂÂðŸâ€Â§ðŸ‘ÂÂ🕺👩â€ÂÂðŸâ€Â§
Merry Christmas i now it early
Thank you! This is going to be very helpful!
The guy scratched the piston putting the ring like this
Hi, Eric the car Guy, can you please make a video for us about PISTON RINGS NPR?
https://www.ebay.com/itm/01-08-Isuzu-Rodeo-2-2L-Suzuki-Reno-2-0L-NPR-Piston-Rings-X22SE-A20DMS/371048804124?hash=item56643b6f1c:g:IL8AAOxySoJTVqgq:sc:USPSFirstClass!33195!US!-1
To heat the wrist pin area of a connecting rod to expand the rod 2 insert the piston wrist pin is bad practice as the applied Heat well remove the hardening temper of the connecting rod at that point and will weaken the tensile strength the the wrist pin can be frozen submerged and liquid nitrogen and then pressed in using a Arbor press that's why it's called a press-fit rather than a slip it by heating metal it's already hardened you well remove hardness temper at that point we were taught 2 replace connecting rod that were discovered do have blue spots because the the rod had been overheated because of lack of oil and is no longer serviceable remember a press-fit is not a slip we are also taught to never apply Heat to the spindle knuckles the front spindle assemblies remove tie rod end that is why they Supply removing forks buy Heating the knuckles you will weaken the metal and will be prone to break
I can learn a lot from this guy
That piston is bigger than my future.
Video is suppose to be about installing rings….